Select Measurement Units

OPERATION

To select between standard units (mph, ºF, etc.) or metric units (kph, ºC, etc.):

1. Press the “▲” or “▼” buttons until “SET UNITS?” is displayed on the Selectable Category part of the display unit.

2. Press the “SET” button to set the unit preference.

3.Press the “▲” or “▼” buttons to select “STAND” for standard or “METRIC” for metric units.

4. Press the “SET” button to confirm your selection.

5. Next, you will see “WIND MPH”. Press the “▲” or “▼” buttons to select MPH, KPH, or KNOTS for wind speed units.

6. Press the “SET” button to confirm your selection.

Units are now set.

Placement for Maximum Accuracy

Display Unit Placement

Place the display unit in a dry area free of dirt and dust. To ensure accurate temperature measurement, place out of direct sunlight and away from heat sources or vents. Display unit stands upright for tabletop use or is wall-mountable.

Important Placement Guidelines

Display unit and sensor must be within 330 feet (100 m) of each other.

MAXIMIZE WIRELESS RANGE

Place units away from large metallic items, thick walls, metal surfaces, or other objects that may limit wireless communication.

PREVENT WIRELESS INTERFERENCE

Place both units at least 3 feet (.9 m) away from electronic devices (TV, computer, microwave, radio, etc.).

Using the Professional Weather Center

Learning Mode

Self-Calibrating Forecasting use a unique algorithm to analyze changes in pressure over a time period (called Learning Mode) to determine your altitude. After 14 days, the Learning Mode icon disappears from the display screen. At this point, the self-calibrated pressure is tuned in to your location and the unit is ready for superior weather prediction.