Programmable Weather Alarms

Each Selectable Weather Category features an alarm option. When an alarm sounds, the display unit emits audible beeping and flashes the affected category, its alarm settings, and any other relevant data.

Some alarms can be customized to alert you when your programmed value is reached. Alarms include:

OUTDOOR HUMIDITY	LOW	HIGH

OUTDOOR TEMP	LOW	HIGH

STORM ALARM	HIGH

INDOOR HUMIDITY	LOW	HIGH

INDOOR TEMP	LOW	HIGH

WIND CHILL	LOW

DEW POINT	LOW	HIGH

HEAT INDEX	HIGH

RAIN	HIGH

WIND SPEED	HIGH

The rain alarm does not require a preset numerical value, but instead sounds as soon as rain is recorded. Similarly, the storm alarm sounds when a large atmospheric pressure drop occurs, which usually indicates an oncoming storm. Note: The storm alarm is NOT intended to be a safety device or warning system.

Set a Weather Alarm

1. Choose the weather category for which you wish to set an alarm by pressing the “▲” or “▼” buttons until the category is displayed on the

Selectable Category part of the display unit.

2. To program a value (only applies to alarms that require a

value), press AND HOLD the “	” button

underneath the alarm you wish to set until the “” indicator appears and the alarm setting flashes.

3. Adjust the alarm value by pressing the “▲” or “▼” buttons.

4. Press the “”

button to confirm value.

5.Next, press the “” button to activate the alarm (the X indicator disappears when alarm is activated).

Alarm is now programmed and turned on.

Silence a Sounding Alarm

The alarm sounds initially for a few minutes, then silences itself. The alarm then sounds every few minutes afterwards until one of the following happens:

1.“SNOOZE” - Press any button. Alarm silences, but sounds again if the alarm condition reoccurs.

2.Turn alarm “OFF” - Deactivates alarm.