Cub Cadet 759-04080 specs

Lock Washer		Special Screw

Hex	Tractor	Spring
Hex	Frame	Spring
Jam	Frame
Jam
Nut

•Insert the cruise latch bracket (Ref. 3) down through the opening in the fender/running board so that its large plate area is against the left side of the magnet. See Figure 8.

Pedal Shaft Plate

Figure 6

• Slide the lock washer (Ref.7) onto the special

screw, then thread the hex jam nut (Ref.4) onto the

screw. Refer to Figure 6.

NOTE: Because of limited space between the ped-

Hex Tapp

Screw

Drive Shaft Shield

Cruise

Latch

Bracket

Magnet

al shaft plate and frame, it may be easier to install

the hex jam nut from the underside of the tractor.

• Fully tighten the hex jam nut onto the special

screw. Then from beneath the right running board

carefully retighten the hex lock nut to reposition the

pedal shaft. Refer to Figure 5.

• Hook the bent tab of the magnet (Ref. 2) into the

square hole of the pedal shaft plate and pivot the

magnet onto the special screw (See Figure 7).

Push the magnet onto the screw so that the bent

tab is behind the plate and retains the magnet on

the screw.

	Magnet
Bent Tab
	Hook tab &
	pivot onto
Square	screw
Hole

Figure 7

•Remove the two hex tapp screws securing the right side of the tractor drive shaft shield to the frame. Refer to Figure 8.

Figure 8

•Pivot the rear of the cruise latch bracket downward so that the bracket mounting holes align with the holes of the drive shaft shield. Refer to Figure 8.

•While holding the cruise latch bracket tightly against the magnet, secure the bracket with the two hex tapp screws removed earlier. Refer to Fig- ure 8.

•Locate the unused two wire connector of the main wire harness along the right side of the frame (See Figure 9). Plug the two wires from the magnet into the wire harness connector.

Drive Shaft

Main Harness

Wire Harness

Connector

Figure 9

•Use the cable tie (Ref.5) to secure the wire har- ness lead and magnet wires to the main harness, away from the drive shaft. Refer to Figure 9.

759-04080 specifications

The Cub Cadet 759-04080 is a high-performance lawn mower blade designed to enhance the cutting efficiency of your riding mower. This equipment is ideal for homeowners seeking a reliable and durable solution for their lawn care needs. With its robust construction and innovative design, the 759-04080 blade provides an optimal cutting experience, ensuring a tidy and well-manicured lawn.

One of the main features of the Cub Cadet 759-04080 is its precision cutting capabilities. The blade is crafted from high-grade steel, which not only contributes to its longevity but also ensures sharpness that can withstand the rigors of frequent use. This results in clean cuts that promote healthier grass growth by minimizing damage to the blades of grass.

The blade’s design incorporates advanced lift technology, which enhances the airflow beneath the mower deck. This feature allows for better grass suction, resulting in efficient clipping collection. This makes the mowing process more effective, significantly reducing the chances of clumping and ensuring an even distribution of grass clippings back onto the lawn when mulching is preferred.

Installation of the Cub Cadet 759-04080 is straightforward, making it user-friendly for homeowners. The blade is designed to be compatible with various Cub Cadet riding mower models, ensuring a seamless fit and easy replacement process. Its standard size is engineered to match perfectly with the mower's deck, allowing for maximum performance without compromising safety.

Durability is a key characteristic of the Cub Cadet 759-04080. The blade undergoes rigorous quality testing to meet high standards of performance and reliability. Weather-resistant coatings are applied to protect against rust and corrosion, ensuring that the blade remains in excellent condition even after prolonged exposure to the elements.

In conclusion, the Cub Cadet 759-04080 stands out as an essential component for maintaining a healthy lawn. Its high-quality construction, advanced design features, and ease of installation make it a top choice among mower enthusiasts. Whether for routine mowing or tackling tougher grass conditions, the Cub Cadet 759-04080 blade delivers outstanding results, solidifying its position as a reliable tool for lawn care.