Cub Cadet BB40 manual Specifications, Engine

Page 15

Section 11

Specifications

ENGINE*

Engine Type

Air-Cooled, 2-Cycle

Cylinder Capacity

40.2 cm3

Cylinder Bore

40 mm

Stroke Length

32 mm

Idle Speed

2,500 rpm

Recommended Maximum Speed

7,500 rpm

Maximum Engine Output (according to ISO 8893)

2 kW/7,500 r/min

Ignition Type/Manufacturer

Electronic/ET

Ignition Switch

Rocker Switch

Spark Plug

NGK BPMR7A

Spark Plug Gap

0.02 in. (0.5 mm)

Lubrication

Fuel/Oil Mixture

Fuel/Oil Ratio

50:1

Carburetor/Manufacturer

Membrane / Walbro

Fuel Tank Capacity

1.6 pints

Catalytic Converter

No

OTHER SPECIFICATIONS*

Approximate Unit Weight (without fuel)

8 Kg

Noise pressure level (measured according to EN31806 and ISO 7917)

89 dB(A)

Noise power level (measured according to EN 31806 and ISO 10884)

103.5 dB(A)

Vibration levels on handles (measured according to EN 31806 and ISO 7916)

 

Vibrations when idling

max of 1.2 m/s2

Vibrations at maximum speed

max of 1.2 m/s2

*All specifications are based on the latest product information available at the time of printing. We reserve the right to make changes at any time without notice.

15

Image 15
Contents Back Pack Blower Table of Contents California Proposition 65 Warning SafetySafety Warnings for Gas Units Before OperatingWhile Operating Other Safety WarningsPersonal Equipment Unit’s Protective Safety EquipmentSymbol Meaning Safety and International SymbolsBlower Components Know Your UnitAssembly Instructions Carton ContentsAssembling the Blower Stroke Oil Oil and FuelOil and Fuel Mixing Instructions Gas InformationStopping Instructions Using the ThrottleOperation Starting InstructionsOperating Tips Holding the Blower/Vacuum Monthly Maintenance Maintenance Daily Maintenance Weekly MaintenanceMuffler CarburetorAir Filter Cleaning the Air FilterCooling System Spark PlugEngine SpecificationsLLC