Epson 9700, 9350 manual Lights indicating a problem

Page 59

Lights indicating a problem

Light state

Cause and solution

 

 

 

 

 

All lights are off

The projector is not receiving power. Make sure the power switch

 

 

 

 

on the back of the projector is turned on and the power cord is

 

 

 

 

connected securely at both ends.

 

 

 

 

 

The temperature

High-speed cooling is in progress. If the temperature rises

light flashes

further, projection will stop automatically. Make sure there is

orange and the

plenty of space around the projector for ventilation. Clean or

 

power light is

replace the air filter if necessary (see page 51).

 

flashing

If you are using the projector at an altitude above 4921 feet (1500

 

 

 

 

 

 

 

 

meters), turn on High Altitude Mode so the fan can cool the

 

 

 

 

projector properly (see page 49).

 

 

 

 

 

The temperature

The projector is too hot, which turns off the lamp automatically.

light is red

Let the projector cool for five minutes, then turn it back on. Make

 

 

 

 

sure there is plenty of space around the projector for ventilation.

 

 

 

 

Also, clean or replace the filter if necessary (see page 51).

 

 

 

 

If you are using the projector at an altitude above 4921 feet (1500

 

 

 

 

meters), turn on High Altitude Mode so the fan can cool the

 

 

 

 

projector properly (see page 49).

 

 

 

 

 

The lamp light

The lamp needs to be replaced soon (see page 53). Make sure

flashes orange and

you have a spare lamp handy. If you just replaced the lamp, you

the

 

power light

may need to reset the lamp usage timer (see page 56).

 

is flashing

 

 

 

 

 

 

The lamp light

The lamp needs to be replaced. If you just replaced the lamp,

flashes red

make sure the lamp and its cover are securely installed (see

 

 

 

 

page 53).

 

 

 

 

 

Both warning

There is an internal problem. Turn off the power switch on the

lights are flashing

back of the projector, and unplug it from the electrical outlet.

red

Then contact Epson for assistance (see page 64).

 

 

 

 

 

The temperature

There is a fan or sensor problem. Turn off the power switch on

light flashes red

the back of the projector, and unplug it from the electrical outlet.

 

 

 

 

Then contact Epson for assistance (see page 64).

 

 

 

 

 

Both warning lights

There is an internal problem. Turn off the power switch on the

are red

back of the projector, and unplug it from the electrical outlet.

 

 

 

 

Then contact Epson for assistance (see page 64).

 

 

 

 

 

Note: If the power and source lights don’t come on, they may have been turned off using the Illumination setting (see page 48).

Problem Solving 59

Page 58 Page 60
Image 59
Page 58 Page 60
Contents User’s Guide Copyright Notice Contents Making Detailed Adjustments Index Introduction Back Projector PartsFront Projector Control Panel BottomRemote Control Registration and Warranty Optional AccessoriesUsing This Manual Choosing a Location Setting Up the ProjectorHorizontal lens shift dial Vertical lens shift dial Aspect ratio Aspect ratio Installing the Projector Following illustrations show the dimensions of the projector Connecting Video and Computer Equipment Connecting the CablesSetting Up the Projector Making Other Connections Turning On the Projector Installing Batteries in the Remote ControlTurning the Projector On and Off Turning Off the Projector Press the P power button on the remote control or projectorSelecting the Image Source Positioning the Image Maximum lens shift boundary Focusing and Zooming Making Basic AdjustmentsChoosing the Aspect Ratio Choosing the Color Mode Advanced Color Adjustments Adjusting the Gamma Setting Adjusting Rgbcmy Locking the Projector Using the Menu System Making Detailed AdjustmentsMaking Detailed Adjustments Changing How the Menus Display Adjusting the Picture QualityInput Brightness Settings Brightness Sharpness and Picture Quality Settings Progressive Block NR Pro Cinema 9700 UB only Color Settings RGB Adjustments for Computer Images Selecting Memory Settings Selecting Memory Settings and Resetting the ProjectorRenaming Memory Settings Creating Memory SettingsResetting the Projector Deleting Saved Memory SettingsImage Sizing Customizing Projector FeaturesScreen Options Other Setup OptionsVideo Signal Control Panel Lock Cleaning the Lens MaintenanceCleaning and Replacing the Air Filter Cleaning the Projector CaseMaintenance Replacing the Lamp Maintenance Maintenance Checking the Projector Status Resetting the Lamp Usage TimerTransporting the Projector Storing the ProjectorWhat To Do When the Lights Come On or Flash Problem SolvingLights indicating a problem You cannot turn on the projector Solving Picture ProblemsYou’re using a computer and no picture appears on the screen Picture isn’t rectangular Projector doesn’t respond to remote control commands Solving Remote Control ProblemsInternet Support Speak to a Support Representative Where to Get HelpLamp SpecificationsGeneral Electrical DimensionsCompatible Video Formats SafetyEnvironmental Hdmi Command ESC/VP21 Command CodesAspect Important Safety Information Page For United States Users FCC Compliance StatementDeclaration of Conformity Epson America, Inc. Limited WarrantyPage Numerics IndexIndex Registration, 10 Remote control batteries, 21 buttons Index

9700, 9350 specifications

Epson has long been a trusted name in printing technology, and the Epson SureColor P9350 and P9700 are two of its latest offerings designed for professionals seeking exceptional quality and performance. Both printers cater to photographers, graphic designers, and artists who need precise color reproduction and flexibility.

The Epson SureColor P9350 features a robust 10-color UltraChrome HD ink set, which includes both color and black inks, ensuring a wider color gamut and deeper tonal ranges. This innovative ink technology enables the P9350 to produce prints that are rich in detail and more vibrant than ever. The printer also offers a high maximum resolution of 5760 x 1440 dpi, allowing for stunningly intricate details in larger prints.

One of the standout characteristics of the P9350 is its advanced PrecisionCore technology. This printhead technology provides high-speed and high-quality printing by delivering precise droplet placement, which results in sharp images and fine details. This inkjet design also minimizes the risk of banding, offering smoother gradient transitions and overall excellent print quality.

On the other hand, the Epson SureColor P9700 boasts similar features but is tailored for different printing media. It supports various paper types, including fine art, canvas, and photo paper, making it ideal for those who work in multiple formats. The P9700 also utilizes the UltraChrome HD ink set, ensuring that prints maintain their quality over time, with improved scratch resistance and enhanced longevity.

Both printers support advanced connectivity options, including USB, Ethernet, and Wi-Fi, allowing professionals to seamlessly integrate them into their workflows. Furthermore, they are equipped with a large touchscreen interface that simplifies navigation between settings and print options.

In addition, the P9350 and P9700 come with an optional automatic roll paper holder, which can handle various roll diameters and allows for continuous printing, perfect for large projects. With their compact design, both printers can fit into various studio spaces without sacrificing performance.

In conclusion, the Epson SureColor P9350 and P9700 are comprehensive solutions for high-quality printing, featuring cutting-edge technologies, exceptional color accuracy, and versatile media handling. These printers are ideal for professionals looking to elevate their printing capabilities and achieve remarkable results.
Top Page Image Contents