Cub Cadet 3165 manual Sparkplugs, SAE 30W

Page 28

See (Figure 24), VISCOSITY CHART,

• Unseat the plastic dust cap from the

below for the proper type of oil.

 

engine oil drain valve. To prevent

 

 

 

 

loss of the cap, do not remove the

Above +40° F

 

SAE 30W

 

cap’s retaining ring from the drain

 

 

 

 

valve. Remove the dipstick.

 

0° to 40° F

 

SAE 5W30

 

 

 

• Attach the flexible tubing to the drain

 

 

SAE 10W30

 

 

 

valve.

Place

an

appropriate

 

 

 

 

Below 0° F

 

SAE 5W20

 

 

 

container below the open end of the

 

 

SAE 5W30

 

tubing to collect the old oil.

 

 

 

 

•

To open

the

drain

valve, push

it

 

Figure 24

 

 

slightly inward and turn it

The oil filter is located behind the left

 

 

counterclockwise until it stops, then

side panel and is mounted on the

 

pull it outward.

 

 

 

engine. See

 

Accessing Engine

• Remove

the

filter

by turning

it

Compartment on page 19 for details

 

counterclockwise

using

an

on removing the side panels.

 

automotive type filter wrench to

Run the engine for a few minutes to

 

loosen.

 

 

 

 

allow the oil in the crankcase to warm

•

Allow the old oil to completely drain

up. Warm oil will flow more freely and

 

from the engine crankcase into the

carry away more of the engine

 

container below. To close the drain

sediment which may have settled at

 

valve, push it inward, turn clockwise

the bottom of the crankcase. Use care

 

until it stops and then release it.

 

to avoid burns from hot oil. While the

•

Remove the flexible tubing from the

engine oil is warm, proceed as follows:

 

drain valve. Clean the tubing and

Note: A length of flexible tubing is

 

store in a safe place for future use.

 

 

 

 

 

 

supplied with the tractor and should be

•

Clean the drain valve and push the

used to drain the engine oil.

 

plastic dust cap onto the valve.

 

Oil Filter

Oil Drain Valve

Figure 25

•Place the tractor on a level surface and engage the parking brake. Stop the tractor engine and remove the ignition key.

•Clean around the base of the oil filter, the oil filler cap, and the dipstick tube to prevent debris from entering the crankcase. See Figure 23 and Figure 25.

•Apply a light coating of clean oil on the gasket of the new oil filter. Thread the filter on by hand until the gasket contacts the oil filter adapter, then tighten the oil filter an additional 1/2 to 3/4 turn.

•Refill the crankcase with the appropriate quantity and type of oil.

•Check oil level and make sure that oil filler cap, dipstick and drain valve are in place and closed.

Sparkplugs

WARNING: To avoid possible injury, be sure the engine is off and has cooled

before making any adjustments or repairs.

Remove all dirt from around the spark plug before removing.

28

Page 27 Page 29
Image 28
Page 27 Page 29
Contents 3000 CUB Cadet P.O. BOX 368023 CLEVELAND, OhioTable of Contents Important Safe Operation PracticesPage Slope Operation Service Calling Service Information Finding Your Model & Serial NumberSafety Labels Found on Your Unit Ignition StopControls PTO Switch Deck Front Lift Rod AssemblySteering Wheel Parking Brake LeverIgnition / Light Switch Center Lift Height IndicatorTransmission Release Rod Transmission Oil Fill/DipstickSeat Adjustment Lever Indicator Light PodOil Pressure Indicator Low Fuel IndicatorSafety Interlock Switches OperationFueling The Tractor Starting The EngineDriving The Tractor Setting The Cruise ControlDriving On Slopes Using The Drawbar Using the Hydraulic Lift SystemStopping The Tractor Opening Tool BoxAdjustments Seat AdjustmentBrake Inspection and Adjustment Steering Wheel Tilt AdjustmentFront Wheel Alignment Turning Radius Adjustment MaintenanceMaintenance Chart Lubrication Illustration Accessing Engine Compartment General Battery InformationBattery Removal Battery MaintenanceBattery Storage Headlight Bulb ReplacementTire Inflation Tail Light Bulb ReplacementChecking Transmission Oil Level Adding Transmission Oil Changing Transmission OilElectrical Box Damage the hydro transmissionFuse Off-Season StorageOwner’s Defect Warranty Rights and Obligations Engine InformationCleaning The Engine Checking Engine Oil LevelAdding Engine Oil Changing Engine OilSparkplugs SAE 30WChanging Air Cleaner Servicing The PrecleanerChanging Fuel Filter Servicing The Paper ElementPage Trouble Shooting Engine Operates Irregularly or KnocksOptional Equipment Possible Cause Possible RemedyTires SpecificationsBrakes Quick Reference Parts Slope Gauge Limited Warranty TWO-YEAR Residential ONE-YEAR Commercial

3165 specifications

The Cub Cadet 3165 is a versatile and robust lawn tractor designed to meet the demands of both residential and semi-commercial gardening applications. As part of the Cub Cadet lineup, it stands out for its exceptional performance, durability, and user-friendly features.

One of the main highlights of the Cub Cadet 3165 is its powerful engine. It is equipped with a 16 horsepower Kohler engine that ensures reliable starts and delivers strong performance for a variety of mowing tasks. With a manual transmission offering six-speed gear options, operators can choose the most suitable speed for their mowing conditions, enhancing control and efficiency.

The cutting deck is another significant feature of the Cub Cadet 3165. It typically features a 38-inch twin-blade setup, allowing for a clean and precise cut on various grass types. The deck is designed for easy adjustment, enabling users to set their desired cutting height with ease. This flexibility is particularly beneficial for maintaining a manicured lawn, as different grass types and seasons may require different cutting heights.

The Cub Cadet 3165 also incorporates advanced technologies to maximize efficiency and comfort. The hydrostatic steering offers effortless maneuverability, allowing users to navigate tight spaces and complex landscapes without hassle. Additionally, the tractor's comfortable seat, equipped with armrests, ensures an ergonomic riding experience during extended periods of use.

Built to last, the Cub Cadet 3165 features a sturdy chassis that provides stability on uneven terrain. The durable construction ensures longevity, allowing users to invest in a lawn tractor that will serve them well over the years. The large rear tires enhance traction and stability, making the 3165 suitable for tackling hills and challenging mowable areas.

Maintenance is simplified with the Cub Cadet 3165, as it features an easy-access engine compartment and a deck that can be easily removed for cleaning and blade sharpening. This convenience is a significant advantage for users who wish to perform regular upkeep without hassle.

In summary, the Cub Cadet 3165 is an efficient and reliable lawn tractor known for its strong 16 horsepower engine, versatile cutting deck, comfortable ergonomics, and easy maintenance. Its combination of power, durability, and user-friendly features makes it an excellent choice for homeowners seeking a robust solution for their lawn care needs.
Top Page Image Contents