Dynacord DMM 4650 owner manual Gong Presets, Operation menu gong

Page 15

GONG

General:

Gong Presets are audio signals that can be started within a sequence. Order and parameters of a gong sequence can be edited. For test purposes the sound can be started in the “gong > editor” menu by use of the PLAY/STOP keys. It is audible via the Pre-Listen outputs.

Gong Presets

20 freely programmable presets (user preset) are available; from G00 - G19. Starting with G20 and going to G26 factory preset gong sequences are programmed. The corresponding functions are explained in the table on page 45. Erasing the factory presets is not possible. Creating your own gong sequence is easiest accomplished by modifying an existing, possibly similar gong (user or factory preset) and storing it under a new number together with its new title and priority.

Operation menu gong

Confirming the menu selection “gong” with the soft key“ok”, the cursor keys < > allow selecting the following sub menus.

Load

Confirming “load” with the soft key“ok”, “Gxx ‘Title ‘and the soft keys ”yes, no" appear on the display. Using the cursor keys the gong number xx is modified while the corresponding name is being displayed. “y” lets you load the selected gong into memory and modification is performed in the “editor” menu.

Editor

The “editor” menu allows modification of gong sequences, envelopes, repetition amounts and several other parameters (see parameter listing). Testing the gong’s sound properties is possible by starting the gong sequence, using the PLAY/STOP key. The audio signal is presented at the pre-listen outputs. Parameter modifications are audible after performing a restart. Pressing the RECORD key stops the gong. After pressing the “EXIT” key (previous menu level), the question “store yes, no?” appears on the display. Acknowledging this question lets you save your new settings in a user preset.

Title

Confirming “Title” with the soft key “ok”, the name of the currently loaded gong sequence appears on the display. Using the cursor keys you are able to enter a new name that consists of up to 8 characters. The soft keys “A-a”are used to shift between the upper and the lower character case while “spc” inserts a blank character. After pressing the “EXIT” key (previous menu level), the question “store yes, no?” appears on the display. Acknowledging this question lets you save your new settings in a user preset.

Priority

Confirming “Priority” with the soft key “ok”, the priority number of the selected gong preset gets displayed. Using the cursor keys, the priority number can be set starting from 00 up to the user priority. A higher priority protects against unauthorized alteration of this preset by users with lower priority level. All factory presets are provided with a priority of 00, because they cannot be overwritten, anyway. This offers any user the possibility to use them as prototype sequences.

After pressing the “EXIT” key (one menu level down), the question “store yes, no?” appears on the display. Acknowledging this question lets you save your new settings in a user preset.

Save

Confirming “save” with the soft key “ok”, the currently selected gong number gets displayed. Using the cursor keys, the desired gong number can be entered. Storing a preset has to be confirmed with the soft key “y = yes”. With“save” all modifications in the above mentioned menu items are saved into the selected user preset. Thus, individually saving the parameters is not necessary, since they remain in memory until another gong is being loaded.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Description DMMContents Page Page Installation instructions Multi-function Display Front PanelRear Panel Use of the DMM Sequence function General Operating the DMMPasswort Operation menu message Message number, PresetMessage GeneralSoft key edt Message memory extension Recording levelRemote recording Audio quality, recording durationGong Presets GongOperation menu gong Type four-stroke, three-stroke List of available gong parametersAlarm Alarm PresetsOperation menu alarm Type continuous sound List of available alarm parametersType Uni-sweep Type Bi-sweepType burst Type Jump soundOperation menu announcement AnnouncementOperation menu trigger TriggerTrigger recognition Examples for trigger settingsStop trigger Sequence PresetsSequences Operation menu sequenceCommand Sequence exampleFunction DMM= List of available step functions in sequencesOperation menu system setup Init DMM BackupSum level AttenuationRestore RS232Clock Operation menu self test Self testPin Name ConnectionsControl levels and currents GeneralInputs Installation exampleAudio inputs and outputs Connection REMOTE/RS Remote, RS 232 interface, data backupInterface settings Backup, Restore commands, PriorityCommand Parameter Function List Remote commandsTerminal programs Factory Presets Factory settings, defaultsList of trigger signals List of factory preset sequences Start DIN alarm key B1 ON, Stop with key B1 OFF Priority Stopp trigger DIN-Alrm B1 Low 00,1s stcPriority Stopp trigger Alrm-Txt B2 Low 00,1s stc Start Pre-gong key B4 on, end of announcement with key Sequence Nummer Title Priority Stopp trigger Vierklng OffTone gong B4 Low 00,1s stcStops by pressing the input C3 button again Sequence Nummer Title Priority Stopp trigger Message2 OffPriority Stopp trigger EasyRec1 C3 High 00,1s lat Starts the recording of Message 01 remote recordingPriority Stopp trigger EasyRec2 C4 High 00,1s lat Starts the recording of Message 02 remote recordingStops by pressing the input C4 again BZB ABC alarm Priority Stopp trigger Ansage D3 Low 00,1s stcKey is being pressed System input -20 dB Priority Stopp trigger Fireship Off Ship alarm Fire Ship alarm General EmergencyShip alarm Manual Morse key Priority Stopp trigger ManMorse OffTelephone bell Gong no Title Prior Type Bar Attack Release Start Repeat cnt List of factory preset gong signalsList of factory preset alarm signals Troubleshooting Error Name Function testAppendix User questions, hints Using the soft key set Examples for Alarm Texts Specifications DMM Warranty

DMM 4650 specifications

The Dynacord DMM 4650 is a powerful and versatile digital mixing console designed for professional audio applications. Built with cutting-edge technology and years of expertise in the audio industry, the DMM 4650 is a go-to solution for live sound engineers, rental companies, and permanent installations.

One of the primary features of the DMM 4650 is its 32 input channels, allowing for seamless integration of multiple sound sources. Each channel is equipped with high-quality preamps that deliver a clean, transparent sound. The console also includes 16 bus outputs, enabling flexible routing options for different sound systems, whether for front-of-house, monitors, or recording purposes.

The DMM 4650 comes with an intuitive user interface, highlighted by a large touchscreen display that provides clear access to all essential parameters and features. This interface allows users to navigate quickly through settings, making adjustments in real-time without disrupting the audio flow. Additionally, the console supports multiple layers of channels, giving engineers the ability to work efficiently during complex shows.

One standout technology incorporated in the DMM 4650 is its digital signal processing (DSP) capabilities, which include high-quality equalizers, dynamics processors, and effects units. The onboard DSP can manage multiple effects such as reverb, delay, and modulation, giving users a wide range of sound-shaping tools. Moreover, the DMM 4650 features an advanced audio networking option, allowing for easy connectivity with other digital equipment and systems, promoting a streamlined workflow.

Robust connectivity is a hallmark of the DMM 4650, which sports both analog and digital outputs, including AES/EBU and MADI options. This flexibility ensures that the console can adapt to various setups and can coexist with existing audio infrastructure without hassle.

Durability is also a key characteristic of the DMM 4650. Designed for the rigors of live performance, the console's rugged construction ensures reliable operation in demanding environments. Whether it's a large concert, corporate event, or installation in a house of worship, the DMM 4650 is engineered to deliver outstanding performance consistently.

In conclusion, the Dynacord DMM 4650 is a comprehensive digital mixing console that combines advanced technology with user-friendly features. Its high-quality audio processing, extensive connectivity options, and robust build make it an excellent choice for audio professionals looking to elevate their sound mixing capabilities.
Top Page Image Contents