Dynacord DMM 4650 owner manual List Remote commands, Command Parameter Function

Page 34

The Backing-up process runs with lowest priority and can be interrupted by other sequences at any time. If this is supposed to be avoided, interrupting sequences are blocked by entering the user3 password (high priority). If the backup is expected to take very long (“backup message”), start “System setup > Restore > ok” after entering the password, in order to prevent the time-dependent switching-off of the operation.

RESTORE stores the data received via the DMM 4650’s REMOTE interface into the stated preset memory. In order to prevent the current memory from being inadvertently overwritten, it is necessary to previously allow this mode in the menu “System setup > Restore > ok”. The DMM 4650 confirms the successful restoration by displaying the message “Preset xx restored”.

List REMOTE - commands

Separation command - parameters are separated by a blank character.

The execution takes place after a line feed command (Return) at the end of a line. Parameter in [ ] are optional

Bold characters describe factory default settings Cancel the data transfer with Strg+C

Command

Parameter

Function

backup

[ ]

[status]

The DMM 4650 sends device status (System setup), preset gong, alarm, sequences,

 

 

 

 

stop trigger, trigger

backup

message

 

The DMM 4650 sends device status (System setup), preset gong, alarm, sequences,

 

 

 

 

stop trigger, trigger and the audio data stored in the message memory (flash memory)

baud

[ ]

[ nnnnn]

shows current baud rate, or sets the DMM 4650’s baud rate to a new value

date

[ ]

[TT.MM.JJ]

shows the current date, or sets the date to a new value

list

Axx

 

 

The DMM 4650 transfers the selected presets’ data to the PC in plain text.

 

Gxx

 

For documentation, it is possible to print the presets’ contents via the PC

 

...

 

 

for further information see help command

Restore

Axx cccccccc

The DMM 4650 stores the data into the stated memory (the correct format is

 

Gxx cccccccc

determined by the backup)

 

...

 

 

for further information see help command

time

[ ]

[hh:mm:ss]

shows current time, or sets the time to a new value

ver

 

 

 

The DMM 4650 transmits the the software revision number

*

 

 

 

ubsequent characters are ignored by the DMM 4650 (comment)

answer

[ ]

[on]

[off]

the answer of the DMM 4650 is switched on or off, or the current status is being displayed

echo

[ ]

[on]

[off]

the output of the received characters is switched on (echo) or off, or the current status is

 

 

 

 

being displayed

linefeed

[ ]

[on]

[off]

the output of an “empty line” after command execution is switchedon or off, or the current

 

 

 

 

status is being displayed

prompt

[ ]

[on]

[off]

tlhe output of the character string “*DMM 4650" after command execution is switched

 

 

 

 

on or off, or the current status is being displayed

?

 

 

 

Help function, displays a listing of the commands

Help

 

 

 

Help function, displays a listing of the commands

Definitions:

 

nnnnn

300 in steps up to 38400

DD.MM.YY

day.month.year

xx

preset number

ccccccc

data

hh:mm:ss

hours : minutes : seconds

34

Page 33 Page 35
Image 34
Page 33 Page 35
Contents DMM DescriptionContents Page Page Installation instructions Front Panel Multi-function DisplayRear Panel Use of the DMM Sequence function Operating the DMM GeneralPasswort General Message number, PresetMessage Operation menu messageSoft key edt Audio quality, recording duration Recording levelRemote recording Message memory extensionGong Gong PresetsOperation menu gong List of available gong parameters Type four-stroke, three-strokeAlarm Presets AlarmOperation menu alarm Type Bi-sweep List of available alarm parametersType Uni-sweep Type continuous soundType Jump sound Type burstAnnouncement Operation menu announcementTrigger Operation menu triggerExamples for trigger settings Trigger recognitionOperation menu sequence Sequence PresetsSequences Stop triggerSequence example CommandFunction List of available step functions in sequences DMM=Operation menu system setup Attenuation BackupSum level Init DMMRS232 RestoreClock Self test Operation menu self testGeneral ConnectionsControl levels and currents Pin NameInstallation example InputsAudio inputs and outputs Backup, Restore commands, Priority Remote, RS 232 interface, data backupInterface settings Connection REMOTE/RSList Remote commands Command Parameter FunctionTerminal programs Factory settings, defaults Factory PresetsList of trigger signals List of factory preset sequences Priority Stopp trigger DIN-Alrm B1 Low 00,1s stc Start DIN alarm key B1 ON, Stop with key B1 OFFPriority Stopp trigger Alrm-Txt B2 Low 00,1s stc B4 Low 00,1s stc Sequence Nummer Title Priority Stopp trigger Vierklng OffTone gong Start Pre-gong key B4 on, end of announcement with keyStarts the recording of Message 01 remote recording Sequence Nummer Title Priority Stopp trigger Message2 OffPriority Stopp trigger EasyRec1 C3 High 00,1s lat Stops by pressing the input C3 button againStarts the recording of Message 02 remote recording Priority Stopp trigger EasyRec2 C4 High 00,1s latStops by pressing the input C4 again Priority Stopp trigger Ansage D3 Low 00,1s stc BZB ABC alarmKey is being pressed System input -20 dB Ship alarm General Emergency Priority Stopp trigger Fireship Off Ship alarm FirePriority Stopp trigger ManMorse Off Ship alarm Manual Morse keyTelephone bell List of factory preset gong signals Gong no Title Prior Type Bar Attack Release Start Repeat cntList of factory preset alarm signals Error Name Function test TroubleshootingAppendix User questions, hints Using the soft key set Examples for Alarm Texts Specifications DMM Warranty

DMM 4650 specifications

The Dynacord DMM 4650 is a powerful and versatile digital mixing console designed for professional audio applications. Built with cutting-edge technology and years of expertise in the audio industry, the DMM 4650 is a go-to solution for live sound engineers, rental companies, and permanent installations.

One of the primary features of the DMM 4650 is its 32 input channels, allowing for seamless integration of multiple sound sources. Each channel is equipped with high-quality preamps that deliver a clean, transparent sound. The console also includes 16 bus outputs, enabling flexible routing options for different sound systems, whether for front-of-house, monitors, or recording purposes.

The DMM 4650 comes with an intuitive user interface, highlighted by a large touchscreen display that provides clear access to all essential parameters and features. This interface allows users to navigate quickly through settings, making adjustments in real-time without disrupting the audio flow. Additionally, the console supports multiple layers of channels, giving engineers the ability to work efficiently during complex shows.

One standout technology incorporated in the DMM 4650 is its digital signal processing (DSP) capabilities, which include high-quality equalizers, dynamics processors, and effects units. The onboard DSP can manage multiple effects such as reverb, delay, and modulation, giving users a wide range of sound-shaping tools. Moreover, the DMM 4650 features an advanced audio networking option, allowing for easy connectivity with other digital equipment and systems, promoting a streamlined workflow.

Robust connectivity is a hallmark of the DMM 4650, which sports both analog and digital outputs, including AES/EBU and MADI options. This flexibility ensures that the console can adapt to various setups and can coexist with existing audio infrastructure without hassle.

Durability is also a key characteristic of the DMM 4650. Designed for the rigors of live performance, the console's rugged construction ensures reliable operation in demanding environments. Whether it's a large concert, corporate event, or installation in a house of worship, the DMM 4650 is engineered to deliver outstanding performance consistently.

In conclusion, the Dynacord DMM 4650 is a comprehensive digital mixing console that combines advanced technology with user-friendly features. Its high-quality audio processing, extensive connectivity options, and robust build make it an excellent choice for audio professionals looking to elevate their sound mixing capabilities.
Top Page Image Contents