Cub Cadet GT 3200 manual Brake Inspection and Adjustment, Checking the Brake, Adjusting the Brake

Page 22

Brake Inspection and Adjustment

During normal operation, the tractor brake is subject to minimal wear. How- ever, the brake should be periodically tested, and adjusted if necessary.

Checking the Brake.

Place the tractor on a firm and level surface. Stop the engine and remove the ignition key.

Pull and lock the transmission release rod in the “Transmission Released” position. Perform the following checks: NOTE: The tractor may be difficult to push because of the hydro transmis- sion’s braking action.

Engage the parking brake. If the tractor can be pushed forward or rearward, the braking force must be increased.

Release the Parking Brake Lever. If the tractor cannot be pushed forward or rearward, the braking force must be decreased.

Adjusting the Brake.

Remove the rear drawbar from the frame by removing the four hex tapp screws. NOTE: The oil fill tube/dipstick will be pulled from the transmission housing. Plug or cover the hole in the transmission to prevent dirt or debris from entering.

From beneath the right/rear side of the tractor frame, secure the hex shaped flange of the brake rod (located just behind the brake link) to prevent the rod from turning (Refer to Figure 18).

From just above the right axle carrier, inside the right frame rail, slowly turn the hex nylon lock nut at the end of the brake rod as follows to adjust the brake (Refer to Figure 18):

Turn the nylon lock nut clockwise to increase the braking force.

Turn the nylon lock nut counter- clockwise to decrease the braking force.

Brake Link

Brake Assembly

(On Transmission)

Brake Rod

Brake Shaft

 

Assembly

Hex Shaped

Flange

Hex Nylon

Lock Nut

VIEWED FROM ABOVE - FENDER AND RUNNING BOARD REMOVED

Figure 18

Recheck the brake adjustment to ensure proper operation, and readjust as necessary. If brake adjustment does not correct the problem, see your authorized Cub Cadet dealer.

While guiding the transmission release rod through keyhole and the oil fill tube/dipstick into the transmission, reinstall the rear drawbar on the frame. Secure with the four hex tapp screws.

Turning Radius Adjustment

This tractor is equipped with hydraulic power steering which is set at the factory. The turning radius should be equal for both left and right hand turns. If adjustment is necessary please contact your authorized Cub Cadet dealer.

22

Image 22
Contents Series Page Table of Contents Tractor Preparation Deck Front Lift Rod AssemblyPosition the High Back Seat Important Safe Operation Practices General OperationSlope Operation Do not Hot Calling Service Information Finding Your Model & Serial NumberSafety Labels Found on Your Unit Deck Height AdjustmentControls and Features Indicator Panel Features See Figure Low Fuel Indicator LampIndicator Panel/Hour Meter Hour Meter/Battery DisplayKey Switch Module Important Mowing in reverse is not recommendedSeat Adjustment Lever PTO Switch12V Power Outlet Parking Brake Lever Forward PedalCup Holder Center Lift Height IndicatorFuel Fill Cap Hydraulic Lift LeverChoke Lever Safety Interlock SwitchesOperation Starting The EngineStopping The Engine Setting The Cruise ControlDriving The Tractor Stopping The Tractor Using the Hydraulic Lift SystemDriving On Slopes Auxiliary HydraulicsUsing the Reverse Caution Mode key position Important The operator Must be seated in the tractor seatEngaging Differential Lock Using The DrawbarMowing Front Wheel Alignment AdjustmentsSeat Adjustment FrontTurning Radius Adjustment Brake Inspection and AdjustmentAdjusting the Brake Checking the BrakeOperation to MaintenanceMaintenance Chart Be performedLubrication Illustration Accessing Engine Compartment General Battery InformationBattery Maintenance Battery RemovalBattery Storage Tire Inflation Charging the BatteryHeadlight Bulb Replacement Checking Transmission Oil LevelAdding Transmission Oil Changing Transmission OilElectrical Box Fuse Off-Season StorageMANUFACTURER’S Warranty Coverage Engine InformationLimitations Checking Engine Oil Level Cleaning The EngineAdding Engine Oil Changing Engine Oil Sparkplugs Changing Air CleanerChanging Fuel Filter Servicing The Paper Element Servicing The PrecleanerServicing Oil Cooler Trouble Shooting Engine Operates Irregularly or KnocksTenance Optional Equipment Description Model NumberTires SpecificationsBrakes Slope Gauge Page Page Cub Cadet LLC, P.O. Box 361131 Cleveland, Ohio Phone 1 Year/500 Hour Limited Warranty Cub Cadet LLC, P.O. Box 361131 Cleveland, Ohio Phone 1 Page Quick Reference Parts Description
Related manuals
Manual 44 pages 50.08 Kb

GT 3200 specifications

The Cub Cadet GT 3200 is a powerful garden tractor that combines robust performance with innovative technology, making it ideal for homeowners and landscapers alike. This formidable machine is equipped with a heavy-duty Kohler engine, offering a variety of horsepower options to meet diverse needs. Whether used for mowing large lawns or tackling tough garden tasks, the GT 3200 proves to be a reliable workhorse.

One of the highlights of the GT 3200 is its Hydrostatic transmission, which provides seamless speed control without the need for manual gear shifting. This feature allows operators to easily navigate varying terrains, ensuring smooth operation in both forward and reverse. The precision steering system enhances maneuverability, making it easier to negotiate tight spaces and garden beds.

The GT 3200 boasts a cutting deck available in various sizes, including 48-inch and 54-inch options. This adaptability enables users to choose the size that best fits their mowing requirements. The deck is designed for efficiency, with dual-blade construction that delivers a clean, even cut across different grass types and terrain. Additionally, the deck’s adjustable cutting height allows for customized results, catering to users' specific aesthetic preferences.

Another notable characteristic of the Cub Cadet GT 3200 is its modular design, which allows for easy attachment of various implements. This versatility makes the GT 3200 suitable for multiple tasks, from mowing to snow clearing or tilling, as it can be equipped with a range of attachments such as snow blowers, front blades, and garden tillers.

Cub Cadet has integrated advanced technology in the GT 3200, including a digital gauge cluster that provides vital information at a glance, such as fuel levels and engine performance metrics. This technology enhances user experience and helps operators maintain optimal performance.

In terms of comfort, the GT 3200 comes with an ergonomic seat and intuitive controls, ensuring that operators can work for extended periods without discomfort. The high-back seat provides excellent support, and the easy-to-reach controls simplify operation, making mowing and gardening tasks less strenuous.

In summary, the Cub Cadet GT 3200 is a versatile, powerful, and technologically advanced garden tractor that offers a wide range of features designed to enhance performance and user experience. Whether for comprehensive lawn care or diverse landscaping tasks, the GT 3200 stands out as a top choice for those seeking quality and reliability in outdoor equipment.