Billy Goat KV600SP owner manual Form No F081108B

Page 5

Part No 891058

KVSP/TKVSP Owner’s Manual

DO NOT run this equipment indoors or in any poorly ventilated area. Refueling outdoors is recommended.

DO NOT refuel this equipment while the engine is running. Allow engine to cool for at least two minutes before refueling.

DO NOT store gasoline near an open flame.

DO NOT remove gas cap while engine is running.

DO NOT start or operate engine if strong odor of gasoline is present.

DO NOT start or operate engine if gasoline is spilled. Move equipment away from spill until gasoline has completely evaporated.

DO NOT smoke while filling the fuel tank.

DO NOT check for spark with spark plug or spark plug wire removed. Use an approved spark tester.

DO NOT operate engine without a muffler. Inspect muffler periodically and replace if necessary. If equipped with muffler deflector, inspect deflector periodically and replace if necessary.

DO NOT operate engine with grass, leaves or other combustible material near the muffler.

DO NOT touch muffler, cylinder, or cooling fins when hot. Contact with hot surfaces may cause severe burns.

DO NOT leave equipment unattended while in operation.

DO NOT park equipment on a steep grade or slope.

DO NOT operate equipment with bystanders in or near the work area.

DO NOT allow children to operate this equipment.

DO NOT operate equipment with guards removed.

DO NOT operate equipment near hot or burning debris or any toxic or explosive materials.

DO NOT operate equipment on slopes greater than specified in Specifications section of this manual.

DO NOT place hands or feet underneath unit, or near any moving parts.

ALWAYS remove spark plug wire when servicing equipment to prevent accidental starting. ALWAYS check fuel lines and fittings frequently for cracks or leaks. Replace if necessary. ALWAYS keep hands and feet away from moving or rotating parts.

ALWAYS store fuel in approved safety containers.

WARNING: Important

Remove all rocks, wire, string, plastic, etc. that can present a hazard during work prior to starting.

DO identify and mark all fixed objects to be avoided during work such as sprinkler heads, water valves, buried cables, or clothes line anchors, etc.

5

Form No F081108B

Image 5
Contents KV600SP, KV650SPH, TKV650SPH Billy Goat KV VacuumAbout this Manual ContentsSerial Plate Data SpecificationsGeneral Safety Instructions and Symbols Form No F081108B Intended USE SoundVibration Data Engine Labels Honda Briggs & StrattonInstruction Labels Parts BAG Literature Assy Packing ChecklistAssembly Starting OperationIf Your Unit Fails to Start Handling & TransportingDebris BAG Vacuuming OperationMulch CompostImpeller Removal MaintenanceDrive Chain Replacement and Alignment Belt Replacement Do not Adjust While the Machine is RunningBelt Tension Adjustment Chipper blades are normal replaceable wear items Chipper Blade Removal and Sharpening TKV onlyWarranty Claim Procedure TroubleshootingParts Drawing KVSP/TKVSP Washer Lock 3/8 ST MED Parts List KVSP/TKVSPMaintenance Record Form No F081108B Form No F081108B