Unpacking
This packaging contains sharp objects. Take care when unpacking. This machine could require two persons to lift, assemble and move. Remove the machine, together with the accessories supplied, from the packaging. Do not throw the packaging away, keep it safe throughout the guarantee period then recycle if possible, otherwise dispose of it by the proper means. Do not let children play with empty plastic bags due to the risk of suffocation.
Operation
Adjusting Fan Pattern
The angle of spray coming out of the lance may be adjusted by rotating the nozzle. This will vary the spray pattern from approximately a 0° narrow high impact stream to a 60° wide fan spray (see figure 1).
The narrow high impact spray (see figure 2) must be used cautiously, as it may damage some surfaces.
Large surface areas can be cleaned more quickly using a wide fan pattern (see figure 3).
Nozzle Cleaning |
|
|
|
|
|
|
|
|
|
| |
A clogged or partially clogged nozzle can cause |
|
|
|
|
|
|
|
|
|
| |
a significant reduction of water coming out of the | Figure 3 Wide fan pattern |
| |||||||||
nozzle and cause the unit to pulsate while |
| ||||||||||
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
| ||
spraying. To clean out the nozzle: |
|
|
|
|
|
|
|
|
|
| |
− Turn off and unplug unit. |
|
|
|
|
|
|
|
|
|
| |
− | Turn off water supply. Relieve any pressure |
| Nozzle | Tip Cleaner | |||||||
| trapped in the hose by squeezing trigger |
|
|
|
|
|
|
|
|
|
|
| times. | Figure 4 Insert tip cleaner in nozzle hole | |||||||||
− | Separate lance from gun. | and move back and forth until debris is dis- | |||||||||
lodged |
| ||||||||||
− | Rotate nozzle to the narrow stream setting. |
| |||||||||
|
|
|
|
|
|
|
|
|
| ||
| This opens up the fan blades. |
|
|
|
|
|
|
|
|
|
|
− | Insert tip cleaner into the nozzle hole and move back and forth until debris is dislodged (see | ||||||||||
| Figure 4). |
|
|
|
|
|
|
|
|
|
|
| − Remove additional debris by |
| a garden hose (with water running) to end of nozzle for |
6 | Customer Careline: 0845 601 7834 |