Assembly
NOTE: Please refer to the photo below and the table and diagram on pages 13 and 14 when reading this section and assembling your pressure washer.
1.Attach the Cart Handle (16) to the Cart Frame (5) as shown in the photo below. Secure in place using the Handle Locking Knobs (23) with Flat Washers (21) and Spring Washers (22). Tighten Securely.
2.Attach the Wheels (4) to the Cart Frame (5) using the Lock Nuts (2) and Flat Washers (3). Press Wheel Covers (1) in place to cover axle ends.
3.Connect the High Pressure Hose (38) to the High Pressure Pump (24) by screwing in place clockwise. Secure tightly.
4.Attach High Pressure Hose (38) to Spray Gun Handle (37) by screwing clockwise. Tighten securely.
5.Coil the High Pressure Hose (38) and hang it on the Hose Bracket (8). Hang the Spray Gun on the Gun Bracket (14).
6.Connect a garden hose water supply to the garden hose connector.
Spray Nozzle
07d
SKU 95619 For technical questions please call | Page 7 |