GE WNSB8060, WNSB9100, WNSB9080 About controls features, Estimated Time Remaining, Spot Spray

Page 9

About controls features.

GEAppliances.com

Throughout this manual, features and appearance may vary from your model.

START

After you have selected a new cycle, press once to start the cycle. Press twice to select the last cycle used and start the washer.

If the washer is running, press once to interrupt the cycle; press again to continue the cycle.

STOP

This pad should not be used to interrupt or pause a cycle.

Pressing this pad will cancel the current settings and the settings will be lost.

Estimated Time Remaining

Displays the approximate time remaining until the end of the cycle.

EST. TIME REMAINING

If the estimated time remaining is more than 60 minutes, “1H” will flash in the

 

 

display, followed by the additional remaining minutes. When the time remaining is

 

less than 60 minutes, the timer will count down.

 

Cycle time is affected by how long it takes the washer to fill. This depends on the

 

water pressure in your home. The “smart” timer “learns” the amount of time it

 

takes to fill your washer and adjusts the total time accordingly.

 

NOTE: If PRESOAK is selected and a follow up wash cycle is not chosen, two dashes

 

will come up in the display.

Spot Spray

Provides a short spray of water to allow you to dampen clothing when you pretreat stains. 1 Open the washer lid.

2 Press the SPOT SPRAY button. (You will see a short stream of water.)

3 Dampen your soiled garment with the SPOT SPRAY option and rub your favorite pretreatment product into soiled area.

NOTE: The SPOT SPRAY option will not work if

the washer lid is down

the washer tub is filling

the water has already reached the level you selected.

BLEACH SIGNAL (on some models)

The Bleach Signal is a reminder signal that can be turned on to remind you to add bleach at the proper time in the wash cycle. Adding detergent and bleach at the same time reduces the effectiveness of both the enzymes in the detergent and the chlorine in the bleach. By adding bleach later in the wash cycle, you allow the detergent’s enzymes to remove dirt and stains first, and then provide a more effective dose of liquid bleach to whiten and sanitize your clothes.

9

Safety Instructions

Operating Instructions

Troubleshooting Tips

Consumer Support

Image 9
Contents Washers Consumer Support Water Heater SafetyModel WNSB9080 Model WNSB9100 Easy ONE Touch Cycles.GEAppliances.comONE Touch selections for Models WNSB9080 and WNSB9100 Changing the automatic settingsSpecial Wash Cycles. on some models Washer control panel for Model WNSB8060 Easy ONE Touch CyclesPRESS... Automatically SELECTS... then Press NE T Ouch selections for Model WNSB8060About Clothes Care Cycles About the variable speed motor. on some modelsAbout controls features Estimated Time RemainingSpot Spray About cycle options SignalAbout other features Cycle Status Indicator LightsPerfecTemp Plus Cleaning the Fabric Softener Dispenser About washer featuresLiquid Bleach Dispenser Agitator Cap or Fabric Softener DispenserSorting Wash Loads Loading and using the washerCare and Cleaning of the Washer Before you call for service… Perfectemp PlusPerformance Operation Water Other NoiseGE Washer Warranty What Is Not CoveredFor The Period Of We Will Replace Parts and Accessories Schedule ServiceConsumer Support GE Appliances Website Real Life Design Studio