Specifications
Electrical Input | 120 V~ / 60 Hz / 12 A (Rated) | |
Maximum | 1,500 PSI | |
Pressure | ||
| ||
Maximum | 1.3 GPM | |
Flow Rate | ||
| ||
High Pressure | 13 ft. | |
Hose |
| |
Power Cord | 35 ft. |
Save This Manual
Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
Important Safety Instructions
In this manual, on the labeling, and all other information provided with this product:
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION, used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE is used to address practices not related to personal injury.
CAUTION, without the safety alert symbol, is used to address practices not related to personal injury.
Safety Warnings
WARNING When using this product basic precautions should always be followed, including the following:
1.Read all the instructions before using the product.
2.To reduce the risk of injury, close supervision is necessary when a product is used near children.
3.Know how to stop the product and bleed pressures quickly. Be thoroughly familiar with the controls.
4.Stay alert – watch what you are doing.
5.Do not operate the product when fatigued or under the influence of medication, alcohol or drugs.
6.Keep operating area clear of all persons.
7.Do not overreach or stand on unstable support. Keep good footing and balance at all times.
8.Follow the maintenance instructions specified in the manual.
9.This product Is provided with A Ground Fault Circuit Interrupter (GFCI) built into the power cord plug. If replacement of the plug or cord is needed, use only identical replacement parts.
10.WARNING – Risk of injection or injury– do not direct discharge stream at persons.
11.Connect to individual branch circuit only.
12.WARNING – To reduce the risk of electrocution, keep all connections dry and off the ground. Do not touch plug with wet hands.
13.Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the pressure washer. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
14.GFCI Precautions
Test GFCI (Ground Fault Circuit Interrupter) before each use as follows:
a.Plug GFCI into power outlet and press reset button. Indicator should turn on.
b.Press test button. Indicator should turn off.
c.Press reset button again for use.
Do not use if above test fails.
The GFCI device does not protect against electrical shock due to contact with both circuit conductors or a fault in any wiring supplying the GFCI device.
To allow GFCI unit to function properly, extension cords must not be used with this pressure washer.
Page 2 | For technical questions, please call | SKU 68333 |