Husqvarna 1337PW Preparing the Unit for Storage, Storing the Engine, Protecting the Pump

Page 14

Storage

PREPARING THE UNIT FOR STORAGE

Water should not remain in the unit for long periods of time. Sediments or minerals can deposit on pump parts and “freeze” pump action. If you do not plan to use the pressure washer for more than 30 days, follow this procedure:

1.Flush detergent siphoning tube by placing filter into a pail of clean water while running pressure washer in low pressure mode. Flush for one to two minutes.

2.Shut off engine and let it cool, then remove high pressure and garden hoses. Disconnect spark plug wire from spark plug.

3.Empty pump of liquids by pulling engine recoil handle about 6 times. This should remove most liquid in pump.

4.Use pump saver to prevent corrosion build up and freezing of pump.

5.Store unit in a clean, dry area.

Protecting the Pump

To protect the pump from damage caused by mineral deposits or freezing, use PumpSaver to treat pump. This prevents freeze damage and lubricates pistons and seals.

CAUTION

You must protect your unit from freezing temperatures.

•Failure to do so will permanently damage your pump and render your unit inoperable.

•Freeze damage is not covered under warranty.

CAUTION

Read and follow all cautions and warnings on the PumpSaver can label.

• Always wear eye protection when using PumpSaver.

To use PumpSaver, make sure the pressure washer is turned off and disconnected from supply water. Read and follow all instructions and warnings given on the PumpSaver container.

NOTE: PumpSaver will drip from pump after treatment and will stain wood and concrete.

NOTE: If PumpSaver is not available, draw RV antifreeze (non-alcohol) into the pump by pouring the solution into a 3-foot section of garden hose connected to inlet adapter and pulling recoil handle twice.

STORING THE ENGINE

NOTE: PumpSaver is available as an optional accessory. It

See the engine owner’s manual for instructions on how to

properly prepare the engine for storage.

is not included with the pressure washer. Contact the

 

nearest authorized service center to purchase PumpSaver.

 

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents 01906 1337PW Equipment Description Table of ContentsSafety Rules When Transporting or Repairing Equipment High pressure spray may damage fragile items including glass Know Your Pressure Washer High Pressure Outlet with Quick Connect- To connectPreparing Pressure Washer for USE AssemblyCarton Contents Remove Pressure Washer From CartonAdd Engine Oil and Fuel Connect Hose and Water Supply to PumpHow to Start Engine HOW to USE Pressure WasherChecklist Before Starting Engine How to Stop Pressure WasherHow to Use the Spray Tips Cleaning and Applying ChemicalDischarging the warm water onto the ground Pressure Washer RinsingAutomatic Cool Down System Pressure Washer Maintenance SpecificationsGeneral Maintenance Recommendations Purge Pump of Air Contaminants Nozzle MaintenanceRing Maintenance To remove air from the pump, follow these stepsOil Change Procedure Engine MaintenancePump Maintenance Check Oil LevelProtecting the Pump Preparing the Unit for StorageStoring the Engine Troubleshooting Page Items Not Illustrated Description Exploded View and Parts List Main UnitDescription Exploded View Pump & Unloader Parts List Pump and Unloader Qty DescriptionPortable Generator About your equipment warrantyEquipment Consumer Use Commercial Use Pressure Washer

1337PW specifications

The Husqvarna 1337PW is a powerful pressure washer designed for both residential and commercial cleaning tasks. With its robust construction and versatile features, this machine stands out in the market for its efficiency and usability.

At the heart of the 1337PW is a reliable and efficient electric motor that delivers a significant amount of pressure, making it ideal for tackling tough dirt and grime. The unit offers a maximum pressure of 2000 PSI and a flow rate of 1.3 GPM, ensuring that users can clean a variety of surfaces effectively. This combination is suitable for tasks like washing cars, cleaning driveways, patios, decks, and siding, allowing for an extensive range of applications.

One of the main features of the Husqvarna 1337PW is its lightweight and portable design. Weighing in at just 36 pounds, it is easy to maneuver, and the integrated wheel system enhances mobility across various terrains. The compact design allows for convenient storage, making it an excellent choice for homeowners with limited space.

The pressure washer is equipped with multiple nozzles that can be easily swapped out, providing flexibility for different cleaning tasks. These nozzles include 0°, 15°, 25°, and soap spray settings, giving users the ability to adjust the pressure and spray pattern according to their specific needs. This versatility ensures that whether you're dealing with delicate surfaces or tougher materials, the 1337PW has a nozzle that can handle the job.

In terms of technology, the Husqvarna 1337PW features an Automatic Stop System that enhances safety and prolongs the lifespan of the motor. The system automatically shuts off the pump when the trigger is not engaged, reducing energy consumption and wear on the unit.

The durable construction is further complemented by the inclusion of a built-in detergent tank, which simplifies the process of mixing and applying soap for those more challenging cleaning tasks. The easy-to-access tank allows for effortless refills so users can spend more time cleaning and less time preparing.

In summary, the Husqvarna 1337PW is an exceptional pressure washer that delivers power, versatility, and ease of use. With its lightweight design, adjustable nozzles, and thoughtful safety features, it stands as a reliable solution for anyone seeking an effective cleaning tool for both home and professional use. Whether you are tackling routine maintenance or deep cleaning jobs, the 1337PW is equipped to meet your demands.
Top Page Image Contents