Husqvarna 1337PW owner manual Add Engine Oil and Fuel, Connect Hose and Water Supply to Pump

Page 7

Assembly

Add Engine Oil and Fuel

•Place pressure washer on a level surface.

•Refer to engine owner’s manual and follow oil and fuel recommendations and instructions.

CAUTION

Any attempt to crank or start the engine before it has been properly filled with the recommended oil will result in equipment failure.

•Refer to engine manual for oil and fuel fill information.

•Damage to equipment resulting from failure to follow this instruction will void warranty.

NOTE: Check oil often during engine break–in. Refer to engine owner’s manual for recommendations.

Connect Hose and Water Supply to Pump

IMPORTANT: To avoid pump damage, you must assemble the nozzle extension to the spray gun and attach all hoses before you start the engine.

1.Remove and discard tape covering pump’s oil filler cap. Remove and discard all pump shipping caps before attaching hoses.

2.Uncoil high pressure hose and attach quick connect end of hose to base of spray gun (Figure 3). Pull down on collar of quick connect, slide onto spray gun and let go of collar. Tug on hose to be sure of tight connection.

Figure 3 — Connect High Pressure Hose to Spray Gun

Connect high

pressure hose

here.

3.Similarly, attach other end of high pressure hose to high pressure outlet on pump. Pull down on collar of quick connect, slide onto pump and let go of collar. Pull on hose to be sure of tight connection.

4.Before connecting garden hose to water inlet, inspect inlet screen (Figure 4).

Clean screen if it contains debris, replace if damaged.

DO NOT RUN PRESSURE WASHER IF SCREEN IS DAMAGED.

Figure 4 — Connect Garden Hose to Water Inlet

Inspect inlet

screen. DO NOT

use if damaged;

clean if dirty.

5.Run water through garden hose for 30 seconds to clean out any debris. Turn off water.

IMPORTANT: DO NOT siphon standing water for the water supply. Use ONLY cold water (less than 100°F).

6.Connect garden hose (not to exceed 50 feet in length) to water inlet.Tighten by hand (Figure 4).

CAUTION

There MUST be at least ten feet of unrestricted garden hose between the pressure washer inlet and any flow shut off device, such as a ‘Y’ shut-off connector or other convenience-type water shut-off valve.

•Damage to equipment resulting from failure to follow this instruction will void warranty.

7.Turn ON water and squeeze trigger on spray gun to purge pump system of air and impurities.

WARNING

High pressure spray can cause paint chips or other particles to become airborne.

•Always wear eye protection when using this equipment or in vicinity of where equipment is in use.

•Before starting the pressure washer, be sure you are wearing adequate eye protection.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents 01906 1337PW Safety Rules Table of ContentsEquipment Description When Transporting or Repairing Equipment High pressure spray may damage fragile items including glass High Pressure Outlet with Quick Connect- To connect Know Your Pressure WasherRemove Pressure Washer From Carton AssemblyCarton Contents Preparing Pressure Washer for USEConnect Hose and Water Supply to Pump Add Engine Oil and FuelHow to Stop Pressure Washer HOW to USE Pressure WasherChecklist Before Starting Engine How to Start EngineCleaning and Applying Chemical How to Use the Spray TipsAutomatic Cool Down System Pressure Washer RinsingDischarging the warm water onto the ground General Maintenance Recommendations SpecificationsPressure Washer Maintenance To remove air from the pump, follow these steps Nozzle MaintenanceRing Maintenance Purge Pump of Air ContaminantsCheck Oil Level Engine MaintenancePump Maintenance Oil Change ProcedureStoring the Engine Preparing the Unit for StorageProtecting the Pump Troubleshooting Page Description Exploded View and Parts List Main UnitItems Not Illustrated Description Exploded View Pump & Unloader Qty Description Parts List Pump and UnloaderEquipment Consumer Use Commercial Use Pressure Washer About your equipment warrantyPortable Generator

1337PW specifications

The Husqvarna 1337PW is a powerful pressure washer designed for both residential and commercial cleaning tasks. With its robust construction and versatile features, this machine stands out in the market for its efficiency and usability.

At the heart of the 1337PW is a reliable and efficient electric motor that delivers a significant amount of pressure, making it ideal for tackling tough dirt and grime. The unit offers a maximum pressure of 2000 PSI and a flow rate of 1.3 GPM, ensuring that users can clean a variety of surfaces effectively. This combination is suitable for tasks like washing cars, cleaning driveways, patios, decks, and siding, allowing for an extensive range of applications.

One of the main features of the Husqvarna 1337PW is its lightweight and portable design. Weighing in at just 36 pounds, it is easy to maneuver, and the integrated wheel system enhances mobility across various terrains. The compact design allows for convenient storage, making it an excellent choice for homeowners with limited space.

The pressure washer is equipped with multiple nozzles that can be easily swapped out, providing flexibility for different cleaning tasks. These nozzles include 0°, 15°, 25°, and soap spray settings, giving users the ability to adjust the pressure and spray pattern according to their specific needs. This versatility ensures that whether you're dealing with delicate surfaces or tougher materials, the 1337PW has a nozzle that can handle the job.

In terms of technology, the Husqvarna 1337PW features an Automatic Stop System that enhances safety and prolongs the lifespan of the motor. The system automatically shuts off the pump when the trigger is not engaged, reducing energy consumption and wear on the unit.

The durable construction is further complemented by the inclusion of a built-in detergent tank, which simplifies the process of mixing and applying soap for those more challenging cleaning tasks. The easy-to-access tank allows for effortless refills so users can spend more time cleaning and less time preparing.

In summary, the Husqvarna 1337PW is an exceptional pressure washer that delivers power, versatility, and ease of use. With its lightweight design, adjustable nozzles, and thoughtful safety features, it stands as a reliable solution for anyone seeking an effective cleaning tool for both home and professional use. Whether you are tackling routine maintenance or deep cleaning jobs, the 1337PW is equipped to meet your demands.
Top Page Image Contents