..
ENGINE KILL LEVER 7
P, | \ | LSPRAYHOSE |
|
Refer to the engine instruction booklet provided with Connect To Water Supply the unit.
CAUTION
|
|
| Beforeattachingtowater | supply.check | local |
Install Hose and Spray Gun |
| plumbing code | |||
Connect the spray hoseto thespray gun by inserting | water supply. |
|
| ||
thepin at theendofthehoseintothequick |
|
|
|
| |
disconnect coupler on the gun. Connect the hose to | Do not exceed 1 60°F (70%) water temperature to | ||||
the fluid outlet in the same way. |
| pump in a direct supply system. |
| ||
|
|
| Connectahose with atleasta 3/4 in. (19 mm) ID | ||
Cleaning Accessories |
| from yourcity water supply | totheunit's | 3/4 in. | |
For spraying detergentor other cleaning | solution, we | garden hose threaded inlet. The supply hose should | |||
recommendusing | a chemicalinjectorkit. | See | not be more than 5 0 ft. (15 m)long. |
| |
NOTE: | For adirectsupply | system. yourwafer | |
installation and operation. | |||
|
| source atthe unit must have aflow rate of | |
For removing rust and old paint we recommend | using | AT LEAST 5 GPM (19 LITER/MINJ. | |
a water sandblaster. See Accessoriesand instruction | If your operating conditions are different fromabove. | ||
manual | |||
| contactourCustomerServiceDepartmentfor | ||
assistance.