Operation, Startup | Graco Inc 800-051, 801-238, 1204E specs

INs1

Check Electrical Service and Plug In

Before plugginginthe sprayer,besure the electrical service is 220 V, 60 HzAC, 20 Amp. With the ON-OFF switch in theOFF position, plug thepower supply cord into agrounded outlet. Do not remove the third prong of the plug1 If youuse an extension cord, it mist have 3 wires of at least 12 gauge (2.5 mm2) and should not be over 100 ft (30.3 m) long.

Install Wheels and Handle

Slide the axle through theframe. Slidethe wheels onto the axle and secure k i t h the cotter pinsprovided. Install the hub caps.

Using the two lowest holes on each leg of theframe, at- tachthe handle withthe 4 screws, flat washers, lockwashers and nuts provided.

Install Hose and Spray Gun

Connect the quick coupleron theend of the tubetothe tip assembly. Connect the hose assembly to thequick coupler at the fluid inletof the gun. Then connect the hose to the Hydra-Clean unit.

Remove the tape from thecap on the top ofthe pump.

Clean Accessories

For spraying detergent or other cleaning solution, we

OPERATION

recommend using a chemical injector kit. See Ac- cessories and instruction manual 801-192 for installation and operation.

Connect To Water Supply

l"Before attaching to the watersupply, check local plumbing code regardingcross-connectionto water supply. If backflow prevention is needed, use accessory check valve 801 -133.

Do not exceed 160OF (7OoC)water temperature to the pump in a direct supply system.

Connect a hose with a least a 3/4 in. (19 mm) ID from your city water supply to the unit's 3/4 in. garden hose threaded inlet. The supply hose should not be more than 50 ft (15 m) long.

NOTE: For a direct supply system, your water source at the unit must have a flow rate of

AT LEAST 4 GPM (19 LITER/MIN).

If your operating conditions are different from above, contact ourCustomerServiceDepartmentfor

assistance.

Startup		pressuregunTriggerback.the anyto	release
Before starting, be sure to read the safety warningsand			WARNING
setup		instructions.
water theTurn on	supply.	DO NOT wire or tie the gun trlgger'into theopen
		orpositiontriggered.

. .

1204E, 801-238, 800-051 specifications

Graco Inc. is a globally recognized brand in fluid handling, offering a diverse range of products characterized by durability, efficiency, and innovative technology. Among its extensive product line, the Graco Inc. models 1204E, 801-238, and 800-051 stand out due to their unique features and robust design, making them essential tools in various industrial applications.

The Graco Inc. 1204E is an advanced air-operated double diaphragm pump known for its exceptional performance and reliability. This model is built with high-quality materials that ensure longevity even in demanding environments. One of its main features is the ability to handle a wide range of fluids, including thick and abrasive materials. The 1204E utilizes a control system that maximizes efficiency by adjusting flow rates automatically, leading to reduced operational costs and improved productivity. Furthermore, its compact design allows for easy installation in tight spaces, making it a versatile choice for numerous applications.

The 801-238 model is a high-performance grease pump specifically designed for reliable lubrication. This pump is equipped with a user-friendly interface and a powerful motor that contributes to its impressive output capabilities. Its robust construction allows it to withstand harsh conditions, ensuring that maintenance tasks can be performed with minimal downtime. A standout feature of the 801-238 is its integrated monitoring system, which provides real-time feedback on pump performance, helping operators to ensure optimal efficiency and identify potential issues before they escalate.

Lastly, the 800-051 represents Graco's commitment to precision and reliability in paint application. This model is engineered to deliver a consistent spray pattern, allowing for a flawless finish every time. The 800-051 incorporates advanced technology that minimizes overspray and waste, making it both an economical and environmentally friendly option. Additionally, its ergonomic design ensures ease of use, which is especially beneficial for long hours of operation.

In conclusion, the Graco Inc. models 1204E, 801-238, and 800-051 highlight the company's dedication to innovation and quality. Each model features technologies that enhance usability and efficiency, ensuring they meet the diverse needs of their users in industrial settings. With Graco's reputation for excellence, these products continue to set the standard in their respective fields.