REMOTE CONTROL
You can control the CD PLAYER with the provided REMOTE CONTROL (including the functions of POWER ON/OFF, MUTE, CONTINUOUS PLAY, DISC CHANGE, VOLUME control, CD REPEAT and PLAY features).
NOTE: When you use the REMOTE CONTROL to operate the CD PLAYER, make sure the POWER switch on the main set is turned on, otherwise, the REMOTE CONTROL will have no functions to the set.
1
2 
10
1. | POWER ON/OFF |
2. | MUTE |
3. | CONTINUOUS PLAY |
4. | DISC CHANGE |
5. | REPEAT - ONE & ALL SONGS |
6. | VOLUME UP/DOWN |
3
9
7. | SKIP BACKWARD |
8. | SKIP FORWARD |
9. | STOP/PROGRAM |
4 
8
57
6
10. PLAY/PAUSE
NOTE: When you press the POWER ON/OFF switch to shut the set off, the VFD display will go out, and the STANDBY indicator on the main set will turn on.
Slide the battery cover to remove. Insert 2 size “AAA” batteries correctly so that the + and - polarities match the polarity diagrams inside the battery compartment.
NOTE:
“ A A A ”
“ A A A ”
•About half a year of normal operation can be expected when using the alkaline batteries.
•when the batteries are exhausted, the remote control will no longer
operate the system. Replace both batteries with new ones.
•When the remote control is not to be used for a long time (2 months or more), remove the batteries to avoid possible damage that may be caused by battery leakage.
•Avoid keeping the remote control in extremely hot or humid locations.
•The remote control’s operating distance is about 0.2m (8 inches) to 6m (20 feet) away from the remote sensor.
4