RECORDING ON A TAPE 1
4
MICROPHONE JACK 5 3 2
Connect the supplied AC power cord (see page 3).
1
2
3
4
5
STOP/EJECT
RECORD
REWIND PLAY
Press the POWER switch, the VFD display will turn on.
Press the STOP/EJECT button (DECK OK | NO |
B) to open the tape compartment and |
|
insert a blank tape. Select the program |
|
source (MW, FM, CD, or microphone) |
|
you want to record. |
|
To record from the CD player, set the FUNCTION switch to CD position, insert a CD and follow the steps to play a CD (see page 5).
To record from a radio, set the FUNCTION switch to RADIO position, and tune into the station you want (see page 9).
To record from the microphone, set the FUNCTION switch to the TAPE position, and plug the microphone (not included) into the MIC JACK. Speak into the microphone.
To record from the DECK A, set the FUNCTION switch to the TAPE position, and follow the steps to play a TAPE (see page 11).
Press the RECORD button to start recording. (The PLAY button is depressed automatically.)
To hear what you recorded, set the FUNCTION switch to TAPE position, then press REWIND and PLAY.
14