Samsung CLP-650 Series How do I specify, Server?, Some documents, Come out as white, Package

Problem	Possible Cause and Solution
How do I specify the	It can be specified in the “Add Printer” dialogue of
IP address of my SMB	the configuration tool, if you don’t use the CUPS
server?	printing system. Unfortunately, CUPS currently
	doesn’t allow you to specify the IP address of SMB
	printers, so you will have to be able to browse the
	resource with SAMBA in order to be able to print.
Some documents	Some versions of CUPS, especially those shipped
come out as white	with Mandrake Linux before the 8.1 release, have
pages when printing.	some known bugs when processing PostScript
	output from some applications. Try upgrading to the
	latest version of CUPS (at least 1.1.14). Some RPM
	packages for the most popular distributions are
	provided as a convenience with this Linux Printing
	Package.
I have CUPS and some	There may be some local options defined in your ~/
options (such as N-	.lpoptions file, which are manipulated by the
up) seem to be always	lpoptions command. These options are always used
enabled even though I	if not overridden by LLPR settings. To get rid of all
don’t choose them in	options for a printer, run the following command,
LLPR.	replacing “printer” with the name of the queue:
	lpoptions -x printer
I configured a printer	Most printing systems will not run as the super-user
to print to a file, but I	but as a special user (usually “lp”). Therefore, make
get “Permission	sure that the file you have chosen to print to is
denied” errors.	accessible to the user owning the spooler daemon.
On my PCL (or GDI)	Unfortunately, some Unix applications may generate
printer, I sometimes	non-compliant PostScript output that may not be
get error messages	supported by Ghostscript, or even the printer itself
printing instead of my	in PostScript mode. You can try to capture the
document.	output to a file and view the results with Ghostscript
	(gv or ghostview will allow you to do so
	interactively) and see if you get error messages.
	However, since the application is probably at fault,
	contact your software vendor to inform them of the
	issue.
Some color images	This is a known bug in Ghostscript (until GNU
come out all black.	Ghostscript version 7.05) when the base color space
	of the document is indexed color space and it is
	converted through CIE color space. Because
	Postscript uses CIE color space for Color Matching
	System, you should upgrade Ghostscript on your
	system to at least GNU Ghostscript version 7.06 or
	later. You can find recent Ghostscript versions at
	www.ghostscript.com.

7.19

Solving Problems