Printer Menu
This menu allows you to reset the printer settings or cancel the current job.
Item | Explanation | |
|
| |
Default Set | This menu item allows you to restore the printer’s | |
factory default settings. | ||
| ||
|
| |
Current Job | You can cancel the current print job and remove it | |
from the printer buffer. | ||
| ||
|
|
Setup Menu
Use the Setup menu to configure a variety of printer features. (*: the default setting)
Item | Explanation |
|
|
| Options: English, Czech, Danish,Dutch, Finnish, |
| French, German, Hungarian, Italian, Norwegian, |
Item | Explanation |
|
|
| Options: Off, On |
| This item determines whether or not the printer |
| continues printing when it detects paper not |
| matched to your paper setting. |
Auto Continue | • Off: If a paper mismatch occurs, the message |
| remains on the display and the printer remains |
| |
| • On: If the paper is mismatched, an error |
| message displays. The printer goes |
| 30 seconds then automatically clears the |
| message and continues printing. |
| Options: Off, On | |
| This item determines how the printer behaves | |
Jam Recovery | when a paper jam occurs. | |
• Off: The printer does not reprint pages. | ||
| ||
| Printing performance might be increased with | |
| this setting. |
| Polish, Portuguese, Russian, Spanish, Swedish, |
LCD Language | Turkish |
| |
| The LCD Language setting determines the |
| language of the text that appears on the control |
| panel display and information printing. |
|
|
| Values: Auto, PCL, HEXDUMP, PS3 |
Emulation | The printer language defines how the computer |
| communicates with the printer. |
| If you select Auto, your printer can change the |
| printer language automatically. |
|
|
| Options: 5 Minutes, 10 Minutes, 15 Minutes, |
| 30 Minutes, 45 Minutes, 60 Minutes, 120 Minutes |
Power Save |
|
| When the printer does not receive data for an |
| extended period of time, power consumption is |
| automatically lowered. You can set how long the |
Altitude Adj.
Auto CR
•On: The printer automatically reprints pages after you clear the paper jam.
Options: Plain, High, Higher, Highest
You can optimize the print quality according to your altitude.
Values: LF, LF+CR
This item allows you to append the required carriage return to each line feed.
Refer to the following samples:
AAAA
BBBB
CCCC
LFLF+CR
printer waits before going to power save. |
| Values: 0 ~ 1800 sec |
| You can set the length of time the printer waits |
Job Time Out | before printing the last page of a print job that |
| does not end with a command to print the |
| page. |
| When a print |
| prints the page in the print buffer. |
3.6
Using the Control Panel
