Samsung CLP-650 Series manual PCL Menu, PostScript Menu, Items you can check, Fuser

Item	Explanation
	This item allows you to maintain the toner
	cartridges and other consumables.
	• Check Others: This item allows you to view
	the usage status of consumables.
	Items you can check:
	- Fuser
Maintenance	- MP Pickroll, Tray1 Pickroll, Tray2 Pick
	roll: These items are only for service
	technicians.
	• Alarm Shortage: This item determines how
	the printer behaves when consumable items
	run low.
	Off: The printer does not display a warning
	message.
	On: The printer displays a warning message.

PCL Menu

This menu sets the PCL emulation configuration. You can set the font type, symbol type, lines per page, and point size.

(*: the default setting)

Item	Explanation
	Values: PCL1 ~ PCL54
	You can select the standard font to be used
	in PCL emulation.
	• PCL1~PCL7’s interval between letters is
Typeface	fixed, and PCL8~PCL44’s interval is
	proportional to the font type and point size.
	You can adjust the font size of PCL1~PCL7
	using the Pitch item, and PCL8~PCL44 can
	do using Point Size item.
	PCL45~PCL54’s interval and point size are
	fixed.
	Values: PC8 ~ PC1004
Symbol	This item selects the symbol to be used in
	PCL emulation. The symbol is the group of
	numbers, marks, and special signs being
	used when printing letters.

3.7

Item	Explanation
	Values: 5 ~ 128
Lines	This item allows you to set vertical spacing
	from 5 to 128 lines for the default paper
	size. The default value of Lines may differ
	according to the paper size and printing
	orientation.
	Values: 0.44 ~ 99.99 (0.01 unit)
Pitch	When you select from PCL1 to PCL7 from
	the Typeface menu, you can determine the
	font size by setting the number of
	characters that will print in one horizontal
	inch of type. The default value, 10, is the
	recommended size.
	Values: 4.00 ~ 999.75 (0.25 unit)
Point Size	When you select from PCL8 to PCL44 from
	the Typeface menu, you can determine the
	font size by setting the height of the font
	characters.
	Values: Regular, Dark
Courier
	This item lets you select the version of
	Courier font to use.

PostScript Menu

This menu provides you with the Print PS Error menu item.

(*: the default setting)

Item	Explanation
	Values: Off, On
	You can select whether or not your printer
Print PS Error	prints an error list when a PS error occurs.
	• Select On to print PS 3 emulation errors. If
	an error occurs, the job stops processing,
	the error message prints, and the printer
	flushes the job.

•If this menu is set to Off, the job is flushed without an indication of the error.

Using the Control Panel