Using Print Materials
4.
6
Printing on Card Stock or Custom-sized Materials• Postcards, 3.5in. by 5.5in. (index) cards and other custom-
sized materials can be printed with your printer. The
minimum size is 3.5in. by 5.5in. (90mm by 140mm) and the
maximum size is 8.5in. b y 14in. (216mm by 356mm).
• Always insert the short edge into the Multi-purpose Tray
first. If you want to print in landscape mode, make this
selection using your software. Inserting the long edge first
may cause a paper jam.
• Do not load more than 10 cards into the Multi-purpose Tray
at a time.
• Do not print on material smaller than 90mm (3.5in.) wide or
140mm (5.5in.) long.
• In the software application, set margins at least 4.3mm
away from the edges of the material.
To print on card stock:
1
Open the Multi-purpose Tray and unfold the paper support.
2
Load print material in the Multi-purpose Tray only,
with
the print side down and the short edge first
. Slide the
guide until it lightly touches the stack without causing it to
bend.
3
When you print, set the paper source to
Multi-Purpose
Tray
and select the appropriate size and type in the
software application.
For details, see the
Software
Section
.
If the size of your print material is not listed in the
Size
box in the
Paper
tab, click the
Custom
button and set
the size manually.
NOTE
:
If you experience jams with card stock feeding, turn
the paper around and try again.