Graco 4043BD, 4035BD Fire & Ventilation Precautions, Carbon Monoxide Hazard, Burn Hazard

Page 4
FIRE & VENTILATION PRECAUTIONS

CARBON MONOXIDE HAZARD WARNING

Do not direct spray on or into electrical installations of any kind! This includes electrical outlets, light bulbs, fuse boxes, transformers, etc. Severe electrical shock may occur.

Even after you shut off the unit, there is high pressure water left in the pump, hose and gun until you release it by triggering the gun. Before removing the spray nozzle or servicing the unit, always shut off the unit and trigger the gun to release trapped pressure.

FIRE & VENTILATION PRECAUTIONS

This unit was designed for outdoor use only. Never operate this unit in an enclosed area. Always make certain there is adequate air (oxygen) for combustion as well as ventilation to prevent the presence of poisonous carbon monoxide gases. Beware of poorly ventilated areas or exhaust fans which can cause inadequate combustion or engine overheating.

Never operate this unit in the presence of flammable vapors or combustible dust, gases or other com- bustible materials. (A spark may cause an explosion or fire.) When servicing this machine, be especial- ly careful to properly dispose of any flammable materials. Do not spray flammable liquids.

Do not smoke while filling engine fuel tank

Never fill the engine fuel tank while the unit is running or hot. Allow the engine to cool two minutes before refueling.

Do not refuel indoors or in a poorly ventilated area.

Always refuel slowly to avoid the possibility of spilled fuel which may cause a risk of fire.

Do not operate the unit if gasoline is spilled. Wipe unit clean and move the unit away from the spill. Avoid creating any ignition until the gasoline has evaporated.

Do not store the unit near an open flame or any equipment such as a stove, furnace, water heater, etc., which utilizes a pilot light or devices which can create a spark.

CARBON MONOXIDE HAZARD

Exhaust contains poisonous carbon monoxide, which is colorless and odorless. Breathing carbon monox- ide can cause death.

Do not operate in an enclosed area.

DETERGENT CLEANING PRECAUTIONS

Do not use solvents or highly corrosive detergents or acid type cleaners with this pressure washer.

Know your detergent. Be prepared to tell a physician exactly what you are using in the event of an emergency. Read the Material Safety Data Sheet (MSDS) provided with your detergent and all deter- gent labels. Follow all appropriate instructions regarding preparation use, safety and transportation. Keep all detergents out of the reach of children.

Do not use this pressure washer to dispense hazardous detergents.

Do not alter the detergent injection feature in any manner not prescribed in this manual. Use only genu- ine replacement parts for necessary repairs.

BURN HAZARD

Equipment surfaces and fluid that’s heated can become very hot during operation. To avoid severe burns:

• Do not touch hot fluid or equipment.

4

Image 4
Contents G-Force Belt-Driven Pressure Washer 3A0519F For high pressure water cleaning For outdoor use onlyInstructions CONTENTS 803508 For Use With Model 4043BDSPRAY PRECAUTIONS IMPORTANT USER INFORMATIONFIRE & VENTILATION PRECAUTIONS DETERGENT CLEANING PRECAUTIONSCARBON MONOXIDE HAZARD BURN HAZARDADJUSTMENT PRECAUTIONS MISCELLANEOUS SAFETY PRECAUTIONSPERSONAL PROTECTIVE EQUIPMENT Component Identification Item DescriptionSetup INSTALLATION & PREPARATION INSTRUCTIONSAttire Engine fuel tank Nozzle ReviewNozzle connection Water supplyPre-start inspection procedures AdjustableUnloader Thermal relief valveOPERATING INSTRUCTIONS Priming the pumpStart-up Cleaning with detergents ShutdownSTORAGE & MAINTENANCE INSTRUCTIONS Belt Tension AdjustmentEngine Pump32˚F 0˚C STORAGE & MAINTENANCE INSTRUCTIONSWinterizing Troubleshooting ProblemSolution CausePUMP SERVICE 4043 MODEL PRESSURE WASHERS ValvesPumping Section Servicing PlungersPUMP SERVICE 4035 MODEL PRESSURE WASHERS Page Pressure Washer - Parts 262297- Model 4043BD69 68 67 61 66 61 66 72 71 78 77 76 75 61 66 65 74 15 16 17 18 19 2 3 16 20Pressure Washer - Parts Pump Assembly - Parts 803508 for use with Model 4043BDPump Assembly - Parts 262296- Model 4035BD Pressure Washer - Parts 24E790 for use with Model 4035BD Pump Assembly - Parts 24E790 for use with Model 4035BDPage Technical Data ModelGraco Standard Warranty For Graco Canada CustomersGraco Information Original instructions. This manual contains English. MM 3A0519