Husky 1550 PSL warranty Operating Instructions Instrucciones DE USO, START-UP Procedure

Page 13

HUSKY 1550

5.0OPERATING INSTRUCTIONS

5.0INSTRUCCIONES DE USO

WARNING

WARNING: Risk of Injury. Do not direct discharge stream at anyone.

ATENCIÓN

IMPORTANTE: Riesgo de daños. NO descarguen el flujo sobre las personas.

5.1START-UP PROCEDURE

1.Connect the high pressure hose to the machine outlet. Ensure that the threads are aligned properly and that the connection is secure (Fig.3-page 6).

2.Connect the garden hose to the garden hose connector attached to the machine inlet. Make sure that the garden hose is connected to a water supply that is turned on (Fig.4+6 - page 7).

3.Insert the lance into the gun by pushing firmly and simultaneously twisting a ¼ of a turn until locked into place (Fig.5-page 7).

4.Plug the GFCI into the power receptacle. Firmly press and release the TEST button then press and release the RESET button. The light on the GFCI should be illuminated (Fig.7-page 8).

5.Ensure that the gun safety is unlocked and squeeze the trigger until the air has escaped and a steady flow of water is coming from the nozzle (Fig.8-page 8).

6.Depress the ON button. Note that the motor will momentarily start then stop (Fig.9-page 8).

7.Squeeze the trigger to start motor and water flow.

WARNING: If the wand is not securely locked into place, it could be ejected under high pressure when operating

WARNING the gun.

WARNING: Make sure the wand is pointed in a safe direction when starting the pressure washer. Do not point at face

WARNING or feet as serious injury could result.

NOTE: Make sure wand is locked. (see fig.5) As shown on page 7.

5.1PROCEDIMIENTO DE PUESTA EN MARCHA

1. Conecte el tubo de alta presión a la salida de la máquina. Asegúrese de que los conductos están correctamente alineados y de que la conexión es segura (Fig.3 - pág. 6).

2. Conecte la manguera del jardín al conector corre- spondiente acoplado a la entrada de la máquina. Asegúrese de que la manguera del jardín está conectada a una toma de agua que esté activa (Fig.4+6 - pág. 7).

3. Introduzca la lanza en la pistola. Para ello, presiónela con firmeza al tiempo que la gira un cuarto de vuelta hasta que queda fijada en su lugar (Fig.5 - pág. 7).

4. Enchufe el GFCI a la toma de corriente. Presione con firmeza y suelte el botón de prueba (TEST). A conti- nuación, pulse y suelte el botón de reinicio (RESET). Se encenderá la luz del GFCI (Fig.7-pág. 8).

5. Asegúrese de que el dispositivo de seguridad de la pistola está desbloqueado y apriete el accionador hasta que salga aire y se genere un caudal de agua constante desde la boquilla (Fig.8-pág. 8).

6. Pulse el botón ON. Recuerde que el motor se encenderá momentáneamente y, a continuación, se detendrá (Fig. 9 - pág. 8).

7. Apriete el accionador para poner en marcha el motor y el caudal de agua.

IMPORTANTE: Si el lanzador no está bien bloqueado en su sede, cuando se utiliza la pistola, podría ser expulsada

ATENCIÓN debido a la alta presión.

IMPORTANTE: Cuando se hace arrancar la hidrolimpiadora, verifiquen que el lan- zador esté dirigido hacia una dirección no

ATENCIÓN peligrosa. No dirigirlo hacia el rostro o los pies, para evitar posibles daños.

NOTA: Asegúrense de que el bloqueo de seguridad esté cerrado (Fig. 5 - pág. 7).

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Page Serial Number HuskyNúmero de Serie ImportantePág Click-N-CleanTMSPRAY NOZZLE.Spray Gun Click-N-CleanTMVariable Spray Lance Parts List FigParts Drawing Diseño Piezas Lista Piezas FigFor Easy Installation Instalación Fácil Connect the Garden HUSKY1550 Importantes Instrucciones DE Seguridad Important Safety InstructionsArcing parts may cause ignition Guarde Estas InstruccionesOperating Connections Power Supply ConnectionConexiones Operativas High Pressure HoseExtensiones Extension CordsCial Automático DE Seguridad Operating Instructions Instrucciones DE USO START-UP ProcedureProcedimiento DE Puesta EN Marcha USE of Cleaning Detergents 1. Remove wand CLICK-N-CLEANTMSPRAY NozzleBoquilla DE Pulverización CLICK-N-CLEANTM USO DE Productos DetergentesApplication of Soap Degreaser Cleaning TechniquesApplication of Liquid Vehicle WAX Técnicas DE LimpiezaEND of Operation Wipe dry to reduce water spottingMoving Finalización DE LA OperaciónMantenimiento MaintenanceManutención DE UN Equipo CON Doble Aislamiento Servicing a DOUBLE- Insulated ApplianceCooling System Sistema DE RefrigeraciónProblem or Concern Possible Cause Solution TroubleshootingNever use Bleach, Ammonia or Hot Water in the unitPump housing is leaking water Email us at Leaking water from bottom Manifold Assembly is leakingFor assistance Or order online atVolume of water reaching the unit Trigger will not move Gun Safety Lock in engagedNo water coming out Wand No wand attached to the GunGun is not operating properly Wand is malfunctioningGun at a rate equal to the Garden Hose Wand Attaching To attach the Wand apply some moderateLocalización DE LAS Averías Problema Causas Posibles SoluciónNo poner nunca lejía, amoniaco o agua Caliente en la unidadCon nosotros vía e-mail en La parte inferior de la La conexión de entrada de laRealice un pedido en La parte inferior de la El colector pierde aguaAgua de la pistola, retirar la pistola y la man Hay un volumen de agua regularGuera para asegurarse que fluye agua de la Contacte con nosotros vía e-mail enDel jardín En una proporción igual a la de la mangueraConectar el tubo Mismo tiempo que se le da 1/4 de vuelta en elDatos Técnicos Technical DataCard is not required to validate this warranty Limited WarrantyHusky Garantía limitada Implied Warranties HOW to Obtain Warranty ServiceCómo Obtener EL Servicio Garantía Llame a nuestro Departamento de Servicio al Cliente alPage Page Hecho EN China

1550 PSL specifications

The Husky 1550 PSL is an advanced injection molding machine that stands out for its precision, efficiency, and adaptability. Designed to meet the demanding needs of various industries, this machine is an embodiment of innovation in the field of plastics manufacturing.

One of the main features of the Husky 1550 PSL is its impressive clamping force. With a clamping force of 1550 tons, it can accommodate a wide range of part sizes, making it suitable for large-scale production. This capability ensures that manufacturers can produce high-quality parts with minimal risk of defects.

The machine utilizes Husky's proprietary preform injection technology, which significantly enhances its performance. This technology enables exceptionally fast injection speeds and consistent shot-to-shot quality, which are crucial for producing intricate designs with precision. The Husky 1550 PSL offers rapid cycle times, leading to increased productivity and reduced costs per part, making it an attractive option for high-volume production scenarios.

Another key characteristic of the Husky 1550 PSL is its enhanced energy efficiency. Equipped with advanced hydraulic systems and servomotors, the machine is designed to consume less energy compared to traditional models. This energy-saving feature not only reduces operational costs but also contributes to a more sustainable production process.

In terms of ease of operation, the Husky 1550 PSL boasts an intuitive touchscreen interface. This user-friendly control system allows operators to monitor and adjust parameters seamlessly, enhancing overall operational efficiency. The machine also incorporates real-time diagnostics and data analytics, enabling predictive maintenance and minimizing downtime.

The versatility of the Husky 1550 PSL cannot be understated. It is adaptable to various molds and processes, including multi-cavity and hot runner systems. This flexibility is critical for manufacturers looking to diversify their product offerings while maintaining high standards of quality.

Additionally, the machine's robust construction ensures long-lasting performance, even in demanding production environments. The steel frame and high-quality components guarantee durability, reducing the need for frequent repairs and maintenance.

In summary, the Husky 1550 PSL injection molding machine combines advanced technology with user-friendly features to deliver exceptional performance and reliability. Its impressive clamping force, energy efficiency, adaptability, and intuitive controls make it an ideal choice for manufacturers seeking to enhance productivity and maintain excellence in plastic part production. The Husky 1550 PSL is indeed a significant asset in the modern manufacturing landscape.
Top Page Image Contents