WORKING WITH DETERGENTS
The high pressure setting is used for cleaning, you cannot apply detergents when working at high pressure. To apply detergents you must be operating at low pressure
Step 1 | Step 3 |
Install the wash brush or the variopower nozzle. | Turn on the pressure washer. Pull trigger to |
Set the variopower nozzle to the low pressure | operate unit: Liquid detergent is drawn into the |
setting | unit and mixed with water. Apply detergent to |
must be set in the low pressure | work area, from bottom to top. Do not allow |
apply detergents. | detergent to dry on surface. |
Step 2
Fill the detergent container with Kärcher detergent. Place the filter end of detergent suction tube into the container.
For best results see Cleaning Tips on pages 9 & 10 for specific information on how to clean different surfaces.
Always Use Kärcher Detergents for Best Results.
Kärcher biodegradable detergents are specially formulated to protect the environment and your pressure washer. Special formula won’t clog the suction tube filter and will protect the internal parts of the pressure washer for a longer life. For Kärcher Detergents, check your retailer or call:
The following Kärcher detergents are available:
•Pressure Wash
•Deck Wash
•Degreaser
•Touchless Vehicle Wash
7
Caution
This machine has been designed for use with cleaning detergent supplied or recommended by the manufacturer. The use of other cleaning detergents may affect the operation of the machine and void the warranty.
Never use
•Bleach, chlorine products and other corrosive chemicals
•Liquids containing solvents (i.e., paint thinners, gasoline, oils)
•
•Ammonia products
•
These chemicals will harm the unit and will damage the surface being cleaned.