Karcher K 2300 ABI manual Operating Instructions

Page 5

OPERATING INSTRUCTIONS

NOTE: Engines controls shown may appear different.

Step 1 Connect the high pressure hose to

Step 2 Connect garden

the unit’s high pressure outlet.

hose to unit’s water inlet.

4

Step 3 Connect garden hose to the cold water source and turn water on completely.

Step 4 Trigger the gun to eliminate trapped air, wait for a steady flow of water to emerge from the spray nozzle.

Step 5 Slide the throttle control to the fast

position.

Model K 2300 ABI-turn the choke lever to the “CHOKE” position (only if engine is cool).After starting, move the choke to “RUN”.

Model K 1800 AB-push primer ball three times. Wait 3 seconds between each push.

Note: in cold weather push 5 times

Step 6 Pull the starter handle. If the engine fails to start after 3 pulls squeeze the trigger gun to release pressure, and repeat step 7.

Image 5
Contents Model K 1800 AB Model K 2300 ABI Never Model K 1800 AB / K2300 ABI OverviewWater Supply Cold Water Only Safety WarningsYou are now ready to operate your Karcher Pressure Washer Assembly InstructionsOperating Instructions Assemble the GUN Using the AccessoriesDetergents can only be applied at low pressure Working with DetergentRemove Step Shutting Down & CLEAN-UPWinterizing and LONG-TERM Storage Cement Patios Brick and Stone Cleaning TipsDeck Cleaning Barbecue Grills, Outdoor Power Equipment Gardening Tools Optional Cleaning AccessoriesPatio & Lawn Furniture RecommendationsSymptom Cause Solution Trouble ShootingTrouble Shooting