Operating Instructions

Step 1

Connect the high pressure hose to the unit’s high pressure outlet.

Step 2

Connect water supply hose to unit’s water inlet.

Step 3

Connect water supply hose to the cold water source and turn water on completely.

Step 4

Plug the power cord into the power outlet. Unlock the lock of the trigger gun.

Step 5 Trigger the gun to eliminate trapped air, wait for a steady flow of water to emerge from the spray nozzle.

Step 6

Turn on the pressure washer (ON). NOTE: This unit is equipped with a pressure switch. The motor only starts up when the trigger on the gun is pulled. The motor shuts off when the trigger is released.