Karcher Complete Assembly Instructions for Pressure Washers: Kärcher T300 Manual

ASSEMBLY INSTRUCTIONS

Step 1

Determine the PSI of your pressure washer.

1200–1600 PSI, Select the gray nozzles.

1700–2300 PSI, Select the yellow nozzles.

GRAY YELLOW

4

Step 2

Insert the 2 matching pressure nozzles in the slots on the propeller and secure with cramp.

Step 3

Insert upper handle into the lower handle by twisting together.

Step 4

Insert lower handle into main housing. Push down and turn clockwise 90° to lock in lower handle.

Step 5

Tighten Lock collar to assemble by twisting counter clockwise.

Step 6

Insert pressure washer wand into upper handle. Push wand down over upper handle and twist clock-wise 1/4 turn into locked position.

Step 7

Turn locking collar clock- wise over pressure washer wand until tight.