Karcher T-Racer, T 300 manual Operation Controls, Spray Power, Air Flow Control

Page 5

OPERATION CONTROLS

Adjust height of propeller spray head.

Clockwise for wood surfaces counter clockwise for stone, concrete and tile.

Adjust the hover effect of the T-Racer by pushing the Air Flow Control into one of the positions from 0 – 1.

The lowest position is 0 and the highest position is 1.

•For optimum setting test the spray power in an unseen area.

•Never operate in the same area for more than 2 seconds, damage may occur

•Do not use on windows..

Image 5

Contents 300 Item Description Racer OverviewNever use Safety WarningsPlease Note Water Supply Cold Water OnlyStep Assembly InstructionsAir Flow Control Spray PowerOperation Controls Horizontal Wood and Decks Normal Operation SettingsVertical Wood, Siding and Facades Horizontal Tile, Concrete and StoneParts List