Karcher K 2.350 manual Assembly Instructions, Operating Instructions, Required tools

Page 6

ASSEMBLY INSTRUCTIONS

Screwdriver, small size (not supplied) for connecting high pressure hose and trigger gun.

ÎSTEP 1:

Insert wheels into the side holes of the unit.

ÎSTEP 3:

APull out the locking slide of the trigger gun handle.

BInsert the small end of the high pres- sure hose into place.

CPush the locking slide back into the trigger gun to lock the hose in posi- tion.

ÎSTEP 2:

Slide the transport handle into place.

ÎSTEP 1:

Connect the high pressure hose to the unit’s high pressure outlet.

ÎSTEP 2:

Insert the spray wand of your choice into the trigger gun. Press in against the spring tension and twist into locked position.

6English

Image 6

Contents 350 Owner/User Responsibility Safety Alert SymbolsHigh Pressure Washer Operator Manual USA and CanadaModel Overview Important Safety Instructions Ground Fault Circuit Interrupter Protection Water Supply Cold Water OnlyOperating Instructions Assembly InstructionsAssembly Required toolsDo not use if above test fails Using the Accessories Vario Power Spray WandDirtblaster Working with Detergents Always Use Kärcher Detergent for Best ResultsShutting Down & CLEAN-UP Taking a Break ..five minutes or moreCare and Maintenance Instructions Cleaning the water inlet filter MaintenanceWinterizing and LONG-TERM Storage House Siding Cleaning TipsDeck Cleaning Cement Patios, Brick and StonePatio & Lawn Furniture Optional Cleaning Accessories25 Ft. Extension /Replacement High-Pressure Hose Pump GuardWide Area Surface Cleaner Soft Clean Washing Brush25 ft. Pipe Cleaning Kit bayonet Rotating Wash Brush bayonetTroubleshooting Symptom Cause SolutionUSA / Canada México