ÎSTEP 3:
Connect garden hose to unit’s water inlet.
ÎSTEP 4:
Connect garden hose to the cold wa- ter source and turn water on com- pletely.
ÎSTEP 5:
Plug the Ground Fault Circuit Inter- rupter (GFCI) into a receptacle. Press RESET button, indicator should be “ON”.
Press TEST button, indicator should be “OFF”.
Press RESET button for use.
We recommend that you test the GFCI as part of your startup procedure each time you use your pressure washer. To learn how to peform this test on your unit, visit http://www.karcherresidential.com/ gfci_test.php for detailed instructions for your type of GFCI.
WARNING
Do not use if above test fails.
ÎSTEP 6:
Unlock the trigger gun safety lock. Trigger the gun to eliminate trapped air, wait for a steady flow of water to emerge from the spray nozzle.
ÎSTEP 7:
Turn on the high pressure washer (I/ ON).
The motor starts only if the trigger of the gun is pulled and shuts off when the trigger is released.
English 7