Karcher K120 M Important Precautions, Assembly Instructions, Water Supply Cold Water Only

Page 4

IMPORTANT PRECAUTIONS – continued

Water Supply

(Cold Water Only)

Water hose must be at least 3/4 inch in diameter.

Flow rate of water supply must not fall below 2.5 GPM (gallons per minute).

Flow rate can be determined by running the water for one minute into an empty 5-gallon container.

The water supply temperature must not exceed 104°F/40°C.

Never use the pressure washer to draw in water contaminated with solvents, e.g. paint thinners, gasoline, oil, etc.

Always prevent debris from being drawn into the unit by using a clean water source.

ASSEMBLY INSTRUCTIONS

3

Step 1 Slide the spray wand extension into the trigger gun. Turn the wand collar onto the gun threads until tight.

Step 2 Connect the detergent suction tube to the pressure washer.

Image 4
Contents High Pressure Washer Operator Manual Model K 210 Overview Power cordNever Important Precautions Read First Ground Fault Circuit Interrupter ProtectionThis Product Is Double Insulated Extension CordsAssembly Instructions Important PrecautionsWater Supply Cold Water Only Operating Instructions Using the Accessories Rotating spray wand Soap NozzleWorking with Detergents Following Karcher detergents are availableShutting Down & CLEAN-UP Taking a BREAK... five minutes or moreWinterizing and LONG-TERM Storage StepCleaning Tips Deck CleaningHouse Siding Cement Patios Brick and StoneCleaning Tips Optional Cleaning AccessoriesBarbecue Grills, Outdoor Power Equipment Gardening Tools Patio & Lawn FurnitureTroubleshooting Symptom Cause Solution Motor will not startTroubleshooting