Karcher K120 M specifications Operating Instructions

Page 5

OPERATING INSTRUCTIONS

Step 1 Connect the high pressure hose to the unit’s high pressure outlet.

Step 2 Insert the spray wand into the wand extension. Push in and turn clockwise to lock spray wand in place.

Step 3 Connect garden hose to unit’s water inlet.

4

Step 4 Connect garden hose to the cold water source and turn water on completely.

Step 5 Plug the power cord into the power outlet. Trigger the gun to eliminate trapped air, wait for a steady flow of water to emerge from the spray nozzle.

Step 6 Turn on (I) the pressure

washer. The motor starts only if the trigger of the gun is pulled and shuts off when the trigger is released.

Image 5
Contents High Pressure Washer Operator Manual Never Power cordModel K 210 Overview Ground Fault Circuit Interrupter Protection Important Precautions Read FirstThis Product Is Double Insulated Extension CordsWater Supply Cold Water Only Important PrecautionsAssembly Instructions Operating Instructions Rotating spray wand Soap Nozzle Using the AccessoriesFollowing Karcher detergents are available Working with DetergentsTaking a BREAK... five minutes or more Shutting Down & CLEAN-UPWinterizing and LONG-TERM Storage StepDeck Cleaning Cleaning TipsHouse Siding Cement Patios Brick and StoneOptional Cleaning Accessories Cleaning TipsBarbecue Grills, Outdoor Power Equipment Gardening Tools Patio & Lawn FurnitureSymptom Cause Solution Motor will not start TroubleshootingTroubleshooting