Karcher K 240 specifications Important Precautions Read First, Important Safety Instructions

IMPORTANT PRECAUTIONS – Read First!

IMPORTANT SAFETY INSTRUCTIONS

WARNING – When using this product basic precautions should always be followed, including the following:

•Read all the instructions before using the product.

•To reduce the risk of injury, close supervision is necessary when a product is used near children.

•Know how to stop the pressure washer and bleed pressures quickly. Be thoroughly familiar with the controls.

•Stay alert — watch what you are doing.

•Do not operate the product when fatigued or under the influence of alcohol or drugs.

•Keep operating area clear of all persons.

•Do not overreach or stand on unstable support. Keep good footing and balance at all times.

•Follow the maintenance instructions speci- fied in the manual.

•This Pressure Washer Is Provided With A Ground Fault Circuit Interrupter Built Into The Power Cord Plug. If Replacement Of The Plug Or Cord Is Needed, Use Only Identical Replacement Parts.

WARNING – Risk of Injection or Injury – Do Not Direct Discharge Stream At Persons.

•High pressure jets can be dangerous if subject to misuse. The jet must not be directed at persons, animals, electrical devices, or the machine itself.

•Wear safety goggles.

•Do not use acids, solvents, or any other flammable material in this product. These products can cause physical injuries to the operator and irreversible damage to the machine.

•This machine has been designed for use with cleaning detergent supplied or recom- mended by the manufacturer. The use of other cleaning detergents may affect the operation of the machine and void the warranty.

•The Gun Safety Lock prevents the trigger from accidentally being engaged. This safety feature does not lock trigger in the on position.

GROUND FAULT CIRCUIT INTERRUPTER PROTECTION

This pressure washer is provided with a ground-fault circuit-interrupter (GFCI) built into the plug of the power-supply cord. This device provides additional protection from the risk of electric shock. Should replacement of the plug or cord become necessary, use only identical replacement parts that include GFCI protection.

SERVICING OF A DOUBLE-INSULATED APPLIANCE

In a double-insulated product, two systems of insulation are provided instead of grounding. No grounding means is provided on a double- insulated product, nor should a means for grounding be added to the product. Servicing

adouble-insulated product requires extreme care and knowledge of the system, and should be done only by qualified service personnel. Replacement parts for a double-insulated product must be identical to the parts they replace.

A double-insulated product is marked with the words “DOUBLE-INSULATION” or “DOUBLE-

INSULATED”. The symbol may also be marked on the product.

EXTENSION CORDS

Use a sufficient gauge:Up to 25 ft = 12/2 AWG 25 to 50 ft =10/2 AWG

Use only extension cords that are intended for outdoor use. These extension cords are identified by a marking “Acceptable for use with outdoor appliances; store indoors while not in use.” Use only extension cords having an electrical rating not less than the rating of the product. Do not use damaged extension cords. Examine extension cord before using and replace if damaged. Do not abuse extension cord and do not yank on any cord to disconnect. Keep cord away from heat and sharp edges. Always disconnect the extension cord from the receptacle before disconnecting the product from the extension cord. If you are using an extension cord, it should always be completely unwound from the cable drum.

WARNING – To reduce the risk of electrocution, keep all connections dry and off the ground. Do not touch plug with wet hands.

3

- SAVE THESE INSTRUCTIONS -