Craftsman 580.76804 manual Carton Contents, To Remove Cleaning System

CARTON CONTENTS

The following parts are shipped loose with your cleaning system:

•Main Unit --Cleaning system with wheels, chemical tanks, guide handle.

•High Pressure Hose (already connected to pump)

•Parts Box (which includes items listed below)

•Spray Gun

•Wand Extension with Hi/Lo Adjustable Nozzle

•Engine Oil

•Three-pack of chemical concentrates

•Manual Bag (which includes the items listed below)

•Owner'sManual

•Nozzle Cleaner Kit

•=O•-Ring Kit

•Tank Labels

Become familiar with each piece before assembling the cleaning system. Check all contents against the illustration on Page 5. If any parts are missing or

damaged, call the Pres.'.sureW.asheF Halpli_at 1-800-222-3136.

TO REMOVE CLEANING SYSTEM

FROM CARTON

•Remove loose parts and parts box included with your cleaning system.

•Slice two comers at guide handle end of carton

from top to bottom so the panel can be folded down flat.

•Raise guide handle, secure in place.

•Roll the cleaning system out the open end of the carton;

•Check carton for additional loose pads.

HOW TO SET UP YOUR CLEANING SYSTEM

For the most part, your Craftsman High Pressure Cleaning System has been assembled at the factory.

You must, however, assemble the spray gun and attach it to th_ high pressure hose.

•Cut the tie wraps on the high pressure hose and connect high pressure hose to gun. Tighten by hand.

• Attach nozzle extension to spray gun.

<%

•Place assembled spray gun on holder.

Lift the handle to

upright position and elide the locking caps into place