Before Starting the Cleaning System

To operatethe engineyouwillneedto dothe following:

Add Engine Oil

Only use high quality detergent oil rated with API service classification SF, SG or SH. Select the oil's

SAE viscosity grade according to your expected operating temperature:

colder _ 40°F _ warmer

<	I
5W30	SAE 30

Although multi-viscosity oils (5W30, 10W30, etc.) improve starting in cold weather, these multi-viscosity

.oils will result in increased oil consumption when used above 40°F. Check your engine oil level more

frequently to avoid possible damage from running low on oil.

•Place cleaning system on a level surface

•Clean area around oil fill and remove oil fill cap.

•Pour oil from enclosed bottle into the oil fill opening until oil reaches the point of overflowing. Do not overfill.

WARNING! Do not oven'illthe fuel tank.

Always leave room for expansion.

,_ C'AUTION!blended fuelsExperience(calledgasoholindicatesor usingthat ethanolalcohol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage.

To add fuel to engine:

•Clean area around fuel cap, remove cap.

•Aad regular unleaded gasoline, slowly, to the fuel tank.

Important: Never mix oil with gasoline.

•Install fuel cap and wipe up any spilled gasoline.

TO STARTTHE CLEANING SYSTEM

The best way to start your cleaning system engine for the first time is to follow these instructions step-by- step. This starting information also applies whenever you start the engine after you have let the cleaning system sit idle for at least a day.

•Place the cleaning system in an area close enough to an outside water source that can flow at a rate of

at least 3.0 gallons per minute. Connect a garden hose to the water spout.

•Check that the high pressure hose is tightly connected to the spray gun and to the pump. See ASSEMBLY section on page 4.

•Check inlet screen on the water inlet. If the screen is dirty, clean before attaching a garden hose. If the screen is damaged, do not connect to the garden hose. Replace with screen provided in maintenance kit or call 1-.800-366-PART to order a replacement inlet screen.

•Attach the the garden hose to the water inlet.

•Turn on the water.

•Installoil fill cap, hand tighten securely.

Add Gasoline

•Use regular unleaded gasolinewiththe cleaning system engine. Fuel tank capacity is 3 U.S. quarts.

,_	fill fuel tank	when engine is running hot. Do
,_	DANGER!	Never fill fuel tank indoors. Never

not smoke when filling fuel tank.

,_ withDANGER!spark plugDo accessnot operatehole orcoverrefuelremovedengine.

Allow engine to cool 2 minutes before refueling.

,_ supplyCAUTIONtconnectedDo notandruntumedpump withouton. You themustwater follow this caution or the pump will be damaged.

•Remove the adjustable nozzle extension from the

,spray gun.

•Pull the trigger on the spray gun and hold until a steady stream of water flows from the gun.

580.76804 specifications

The Craftsman 580.76804 is a powerful and versatile leaf blower that has garnered attention for its performance and user-friendly design. This electric blower is particularly ideal for homeowners and gardeners looking for a reliable tool to maintain their outdoor spaces.

One of the standout features of the Craftsman 580.76804 is its electric power source, which provides a consistent and dependable airflow without the hassle of gas mixing and maintenance. With a robust 12-amp motor, this blower delivers strong performance, producing impressive air speeds that can handle a variety of yard tasks, from clearing leaves and debris to cleaning hard surfaces like driveways and patios.

Equipped with an easy-to-use corded design, users can enjoy the convenience of extended use without worrying about battery life. The Craftsman 580.76804 also features a lightweight and ergonomic build that makes it easy to maneuver around the yard, reducing fatigue during prolonged use. Its balanced design allows for effortless handling, whether you are using it for short bursts or extended periods.

The Craftsman 580.76804 includes variable speed settings, enabling users to adjust the airflow to suit different tasks. This feature allows for greater control when dealing with light debris or when a more powerful blast is required for stubborn piles of leaves. This versatility makes the blower a valuable addition to any gardener’s toolkit.

An additional highlight of this leaf blower is its built-in vacuum capability. With a simple switch, users can convert the blower into a vacuum that not only collects debris but also has a mulching feature to break down leaves into smaller pieces. This helps reduce yard waste and makes it easier to dispose of or compost, promoting an eco-friendly approach to yard maintenance.

The Craftsman 580.76804 is also designed for straightforward storage, with its compact shape allowing it to fit easily in a garage or shed. Overall, this leaf blower combines power, convenience, and eco-friendliness, making it an excellent choice for homeowners seeking efficient yard care solutions. With its innovative features and solid construction, the Craftsman 580.76804 is an investment that pays off in ease of use and reliable performance.