Nilfisk-ALTO E 140.1, E 130.1 user manual Maintenance, EN 6.3 Storage of accessories

Page 12

EN 6.3 Storage of accessories

 

B

A

D

 

C

 

E

C

A

B

D

E

The standard accessories (spray gun and spray lance (a), nozzles (b) foam sprayer (c)) can be stored on the pressure washer.

The nozzle cleaning tool (d) and a Click & Clean brush

(e)can also be stored on the product.

7 Maintenance

WARNING! Always disconnect the electrical plug from the socket prior to maintenance or cleaning.

To ensure a long and problem free working life, please take the following advice:

Wash out water hose, high pressure hose, spray lance and accessories before mounting.

Clean the connectors of dust and sand.

Make sure that no sand or dirt is blocking the movement of the pawl on the Click & Clean spray lance. Rinse ac- cording to requirement. Rinse the detergent spraying attachment after use.

Clean the nozzles.

Any repair should always be made in an authorized work- shop with original spare parts.

12

Image 12
Contents Nilfisk-ALTO E 130.1, E Page Safety Precautions and Warnings Symbols used to mark in- structionsIndex Description Before you start using your pressure washer EN 4 Operating your pressure washer Point the nozzle at the ground IMPORTANT! Only use wa Ter without any impurities. IfPressure regulation on the Tornado PR- nozzle Stationary useImportant The bearing capacity of the wall hook is max kg Fields of application and working methods General Mechanical effect Task Accessories ‘Click Cleaning method Clean’ EN 5.2 Typical fields of applicationAfter using your pressure washer Frost damages are not covered by the guaranteeMaintenance EN 6.3 Storage of accessoriesPage EN 8 Trouble-shooting Further information Page EU Declaration of Conformity Page Head Quarter