EN 4.5 Start the machine (when connected to open con- tainers (suction mode))
The washer can take in water from a rain water tank as an example. The hose for the wa- ter supply must not be too long, approx. 5 m.
Make sure that the water tank is not placed on a lower level than the machine.
1.Place the other end of the water hose in the water tank. Use an external fi lter if the water contains impurities.
2.Press the start/stop switch "I".
3.Activate the trigger of the spray gun and let the water run, until the air has escaped from the water hose and the pump.
4.Mount spray lance and nozzle.
4.6Pressure regulation on the TORNADO® PR- nozzle
High pressure |
Low pressure |
The pressure can be regulated on the TORNADO® PR nozzle.
4.7 Stationary use
A |
|
C | B |
| D |
If mounting a special wall hook (not standard), the pressure washer can be used as a sta- tionary solution meaning that it can be operated while hanging on the wall.
Only mount the wall hook on a sturdy wall. Adjust the length of the screws and size of rawl- plugs to the type of wall.
On the wall hook garden/rim brush (a) foam sprayer (b), Click & Clean brush (c) and Click & Clean nozzles (d) can be stored.
Important: The bearing capacity of the wall hook is max. 30 kg.
8