Extension cables should be of a watertight construction and comply with the
1.0 mm² | max. | 12.5 m |
1.5 mm² | max. | 20 m |
2.5 mm² | max. | 30 m |
zCable connections should be kept dry and off the ground.
Mains power connection
The following should be ob- served when connecting the high pressure washer to the electric installation:
zOnly connect the machine to an installation with earth con- nection.
zThe electric installation shall be made by a certifi ed elec- trician.
zIt is strongly recommended that the electric supply to this machine should include a re- sidual current device (GFCI).
Water connection Connection to the public mains according to regulations.
IMPORTANT! Only use wa- ter without any impurities. If there is a risk of running sands in the inlet water (i.e. from your own well), an additional fi lter should be mounted.
Repair and maintenance Always remove the electric plug from the socket before car- rying out maintenance work on the machine.
Safety devices
Locking device on spray gun (7a) (see foldout at the end of this manual):
The spray gun features a lock- ing device. When the pawl is activated, the spray gun cannot be operated.
Thermal sensor:
A thermal sensor protects the motor against overloading. The machine will restart after a few minutes when the thermal sen- sor has cooled.
2 Description
2.1 | Application | This |
|
| been developed for domestic |
|
| use within: |
|
| - Car, Motorbike, boat, cara- |
|
| van, trailer, patio/drive/flags- |
|
| tones, woodwork, brickwork, |
|
| barbecue, garden furniture, |
|
| lawn mower |
|
| Section 5 describes the use of |
2.2 | Operation elements | See foldout at the end of this |
| and model survey | manual. |
1 Start/stop switch
2 Water inlet (with fi lter)
3 High pressure connection
4 High pressure hose
5 Electric cable
6 Click & Clean spray lance
7 Spray gun with lock
8 Click & Clean Tornado® PR nozzle
9 Click & Clean Powerspeed® nozzle
10 Click & Clean foam sprayer
the
Only use the
The safety precautions must be observed to prevent damage to the machine, the surface to be cleaned or severe personal injuries.
11Nozzle cleaning tool
12Trolley Handle
13Hose reel (not standard)
14Hose hook
15Model tag
Specifications: See model tag (15) of machine.
Sound pressure level measured in accordance with ISO 3744, EEC Directive 2000/14/EEC: LpA = 71.3 dB(A), LWA = 86 dB(A).
We reserve the right to alter the specifi cations.
4