Nilfisk-ALTO Multi-User Pressure Washer System manual Operation and Specifications, Desired

Operation and Specifications

EASY TO USE

•Since the Delta Booster is auto- matically controlled by system pressure, an operator can go to any cleaning station, quick-con- nect a high pressure hose to the outlet, open the ball valve on the pipe system, and squeeze the trigger… and the system starts automatically.

•Changing the pressure and vol- ume for each operator is as easy as using the proper spray lance. The lances quick-connect to the gunvalve, and they are designed to call for a specific pressure and flow from the system. Once again, fully automatic.

•The system is designed to stand quietly in the “Standby” mode until an operator needs to clean. There is no “start-up” procedure other than connecting the high pressure hose and squeezing the trigger.

operator cleans with 800 psi and 9 gallons per minute, another, with a different task can have 2300 psi and 4.5 gpm simultane- ously.

•Cleaning operators won’t waste time connecting portable machines to water and power, since the Delta Booster’s clean- ing power is available at every cleaning station in your plant. Less than a minute after arriv- ing, your cleaning operators are working.

•No compromises necessary. Cleaning tasks which involve removing heavy contaminants benefit from higher water vol- ume … though these tasks can be done with lower volume and more time. Some tasks benefit from higher pressures, though if you throw a lot of water at the task for a long enough period, you’ll still get good results. With

the Delta Booster, those forms		crankcase is sealed to prevent
of time-wasting aren’t necessary		contamination of
because you can have both… at		the lubricant, and the wobble
the same time. Your operators		disk is supported by 2 oversized
spend their time cleaning rather		roller bearings and 2 heavy duty
than waiting.		needle bearings.
KEY FEATURES	•	The frame, cabinet and high
		pressure plumbing are construct-
• Fully automatic operation with-		ed of stainless steel for corrosion
out the use of remote switches or		resistance.
controls. • Easy access for service	•	The system automatically rotates
or maintenance keeps the system		pump usage.
on line. • Built-in diagnostics for	SAFETY
speedy troubleshooting. • Systems
can be easily “chained” to provide	•	No electrical components or
more than 6 pumps on a single		switches at the cleaning stations.
pipe system.	•	Cleaning operators don’t work
• Works with CIP fixtures.		with electrical receptacles as is
DURABILITY		necessary with portable units.
	•	System automatically shuts down
• The Delta Booster features the		if a cleaning station valve is
C3 pump from KEW Technology.		inadvertently opened without a
The C3 pump has 4 solid ceramic		hose attached.

plungers and is virtually vibra- tion and pulsation-free. The

P/N 8880007

PRODUCTIVITY

• Water volume and pressure are the two variables that make a difference in cleaning applica- tions… and you can tailor the output of the Delta Booster for each of your in-plant cleaning operators simply by changing the lance being used. While one

COLORED LANCES AVAILABLE

	Desired		Desired		No. of pumps
	Pressure *		Water Volume		to support
	1740 psi	2320 psi	1740 psi	2320 psi
White	300	400	4.5	4.5	1
Black	300	400	8.3	9	2
Brown	600	700	4.2	4.5	1
Green	600	800	8.3	9	2
Blue	900	1200	4.2	4.5	1
Red	900	1200	6.9	7	1.5
Orange	1200	1600	4.5	4.5	1
Yellow	1200	1600	7	7	1.5
Silver	1700	2200	4.5	4.5	1

*The system is set-up on-site as a 1740 or 2320 psi base pressure system, depending upon the customer’s needs. When the appropriate colored lance is used, the operator’s pressure and volume are as shown in the table.

Colored lances are available for both base systems in lengths of 4 in., 22 in., and 36 in.

SYSTEM SPECIFICATIONS

				X2	X3	X4	X5	X6
Part	Number			7330021 7330121 7330221 7330321 7330421
System	Volume	(gpm)		9.0	13.5	18	22.5	27
Maximum Pressure			(psi)		1740 or 2320
Max. Inlet Temp.						185°F
Adjustable Outlet Temp.				Mixed according to user settings
Hour Meters					Yes - for each pump
Voltage					3 phase, 440-480 *
Amperage**				21	31	41	51	61
Inlet Water				1 in. connections for hot and cold
Dimensions					31 W x 31 D x 71 H

*220V / 3 ph systems available on special order

**Double the amperage for 220V / 3ph systems

©2006 Nilfisk-ALTO Cleaning Systems, Inc. All Rights Reserved. Specifications subject to change without notice.

DISTRIBUTED BY:

Nilfisk-ALTO Cleaning Systems, Inc.

2100 Highway 265 South • Springdale, AR 72764 Phone: 877.366.2586 • Fax: 800.405.9092 info@altocsi.com • www.nilfisk-alto.us