Delta D2400H instruction manual D28609 ENG

Page 10

5.To Assemble Quick Connect Grommets:

a. Squeeze grommet and place into hole, fitting groove to rim.

b.Push grommet into place.

c.Repeat steps until all grommets are assembled.

6.To Assemble Quick Connect Nozzles:

a.Remove five colored quick connect nozzles from plastic bag and insert them into correct grommet. NOTE: Nozzles are color coded to match colored nozzles on panel.

7.Add engine oil (supplied) to engine. Refer to Engine Owners Manual supplied by engine manufacturer for correct procedure.

NOTE: There will be a slight amount of oil in the engine from factory testing.

NOTE: The high pressure pump was filled with oil at the factory. There is no need to add oil at this time, see the Maintenance section of this manual for maintenance information.

D28609

10- ENG

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Instructio N M Anual Safety Guidelines Definitions Consumer Safety InformationRisk of Explosion or Fire Important Safety InstructionsRisk to Breathing Risk of Fluid Injection Risk of Chemical BurnRisk of Electrical Shock Risk of Unsafe OperationRisk of HOT Surfaces Consumer General and Service Information Risk of Injury from SprayCarton Contents Assembly Instructions ENG D28609 D28609 ENG Operating Instructions Basic Elements of a Pressure WasherPressure Washer Operating Features Basic Elements of EngineTo USE Spray Wand HOW to Apply Chemicals and Cleaning Solvents Read and Understand ALL Warnings Before Starting UnitStarting Shutting DownNozzle Cleaning MaintenanceEngine Pump HOW to Clean the Water Inlet Filter Storage Problem Trouble Shooting GuideCausecorrection Problem Cause Correction ChemicalsENG D28609 Warranty
Top Page Image Contents