Delta DT2400CS instruction manual Read and Understand ALL Warnings Before Starting Unit

Page 15

READ AND UNDERSTAND ALL WARNINGS BEFORE STARTING UNIT

When using the high pressure setting, DO NOT allow the high pressure spray to come in contact with unprotected skin,

eyes, or with any pets or animals. Serious injury can occur.

Your washer operates at fluid pressures and velocities high enough to penetrate human and animal flesh, which could result in amputation or other serious injury. Leaks caused by loose fittings or worn or damaged hoses can result in injection injuries. DO NOT TREAT FLUID INJECTION AS A SIMPLE CUT! See a physician immediately!

NEVER fill fuel tank when engine is running or hot. Do not smoke when filling fuel tank.

NEVER fill fuel tank completely. Fill tank to 1/2" below bottom of filler neck to provide space for fuel expansion. Wipe any fuel spillage from engine and equipment before starting engine.

NEVER run engine indoors or in enclosed, poorly ventilated areas. Engine exhaust contains carbon monoxide, an odorless and deadly gas.

DO NOT let hoses come in contact with very hot engine muffler during or immediately after use of your pressure washer. Damage to hoses from contact with hot engine surfaces will NOT be covered by warranty.

NEVER pull water supply hose to move pressure washer. This could damage hose and/or pump inlet.

DO NOT use hot water, use cold water only.

NEVER turn water supply off while pressure washer engine is running or damage to pump will result.

DO NOT stop spraying water for more than two minutes at a time. Pump operates in bypass mode when spray gun trigger is not pressed. If pump is left in bypass mode for more than two minutes internal components of the pump can be damaged.

If you do not understand these precautions, please call 1-866-422-4286 to speak to a service representative for further instructions.

STARTING

Prior to starting, refer to your engine manual for proper starting procedures for your engine type.

1.In a well ventilated outdoor area add fresh high quality unleaded gasoline with a pump octane rating of 86 or higher. Do not overfill. Wipe up spilled fuel before starting the engine. Refer to engine manual for correct procedure.

2.Check engine oil level. See Engine Owners Manual for correct procedure.

NOTE: There will be a slight amount of oil in the engine from factory testing.

3.Verify the filter screen is in water inlet of pump. NOTE: Cone side faces out.

Filter Screen

15- ENG

D27918

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Instructio N M Anual Consumer Safety Information Table of ContentsImportant Safety Instructions Risk of Explosion or FireRisk to Breathing Risk of Chemical Burn Risk of Fluid InjectionRisk of Unsafe Operation Risk of Electrical ShockRisk of HOT Surfaces Risk of Injury from Spray Consumer General and Service InformationCarton Contents Assembly Instructions Remove Loosen Barb fitting Basic Elements of a Pressure Washer Operating InstructionsPressure Washer Terminology Pressure Washer Operating FeaturesPressure Adjustments Basic Elements of EngineHOW to USE Spray Wand Dual Tank Cleaning Solution Tips HOW to USE the Dual Tank Cleaning SystemStarting Read and Understand ALL Warnings Before Starting UnitShutting Down Engine Nozzle Cleaning MaintenanceHOW to Clean the Water Inlet Filter Engine Pump StorageDual Tank Cleaning System Problem Cause Correction Trouble Shooting GuidePressure after ENG D27918 Warranty

DT2400CS specifications

The Delta DT2400CS is a high-performance tool that caters to the needs of both professionals and enthusiasts in woodworking and construction. This compact yet powerful saw is engineered for precision, durability, and ease of use, making it an essential addition to any workshop.

One of the standout features of the Delta DT2400CS is its robust 15-amp motor, which provides substantial cutting power and enables the saw to tackle a variety of materials effortlessly. The motor supports a high no-load speed, ensuring smooth and efficient operation. This allows users to cut through hardwoods, softwoods, and composite materials without encountering bogging down or stalling.

The DT2400CS is equipped with a 24-inch capacity, making it ideal for larger workpieces without sacrificing the portability that many users desire. Its adjustable table height and width provide added flexibility and support for various cutting tasks, allowing operators to achieve superior accuracy in their cuts. The saw features a precision-ground cast iron table for stability and reduced vibration, ensuring cleaner cuts and improving the overall experience.

Safety is a top priority with the Delta DT2400CS, which includes a range of protective features. The blade guard is easily adjustable and removable, ensuring that operators can maintain proper safety practices while having clear visibility of the cutting line. The integrated riving knife helps prevent kickback, and the on/off switch is conveniently located for quick access during operation.

The Delta DT2400CS also incorporates advanced technology for enhanced performance. The built-in dust collection port facilitates a cleaner workspace by connecting to standard shop vacuums, which is essential for maintaining visibility and safety. Additionally, the saw has a sturdy fence system that locks securely in place, allowing for straight, consistent cuts.

Overall, the Delta DT2400CS is characterized by its blend of power, precision, and safety features, making it an optimal choice for carpenters, cabinet makers, and DIY enthusiasts alike. With its professional-grade specifications and user-friendly design, this table saw is designed to handle a wide range of cutting tasks, elevating users' woodworking projects to the next level. Whether working on intricate designs or large construction projects, the Delta DT2400CS proves to be a reliable ally, ensuring both quality results and user satisfaction.
Top Page Image Contents