Delta DT2400CS instruction manual Shutting Down

Page 16

4.

Connect water source to pump inlet.

 

 

 

 

 

 

Water

 

 

 

 

NOTE: Water source must provide a minimum of 5

 

Source

 

 

 

 

gallons per minute at 20 p.s.i.

 

 

 

 

 

5.

Connect high pressure hose to pump outlet.

 

 

 

 

 

6.

If applying a cleaning solution, see How To Use

 

 

 

 

 

 

the Dual Cleaning Solution System in Operation

 

 

 

 

 

 

section of this manual.

 

 

 

 

 

 

 

 

 

High

 

 

 

 

 

 

 

7.

Turn water source on.

 

 

 

Pressure

 

 

 

 

Hose

 

 

 

 

 

 

 

8.

Start engine. See Engine Owners Manual for

 

 

 

Hook-up

 

 

correct procedure. NOTE: If the engine does not

 

 

 

 

 

 

 

 

 

 

 

 

start after two pulls, pull the trigger to relieve the pressure.

9.Depress trigger on gun to start water flow. NOTE: Stand on a stable surface and grip gun/wand firmly with both hands. Expect the gun to kickback when triggered.

10.Release trigger to stop water flow.

11.Adjust nozzle spray for the task being performed. See How To Use Wand instructions in this section.

SHUTTING DOWN

1.After use of cleaning solution the chemical injector MUST be rinsed in order to prevent pump damage caused by solution build up. The warranty will not cover pumps that are damaged because the chemical injector was not properly rinsed.

To rinse chemical injector using chemical injector hose

a. Remove cleaning solution hose from chemical injector barb fitting.

b.Push chemical injector rinsing hose onto the chemical injector barbed fitting.

c.Place other end of chemical injector rinsing hose into container of clean water and depress trigger to draw at least one gallon of clean water through chemical injection system to rinse system thoroughly.

D27918

16- ENG

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Instructio N M Anual Table of Contents Consumer Safety InformationRisk of Explosion or Fire Important Safety InstructionsRisk to Breathing Risk of Fluid Injection Risk of Chemical BurnRisk of Electrical Shock Risk of Unsafe OperationRisk of HOT Surfaces Consumer General and Service Information Risk of Injury from SprayCarton Contents Assembly Instructions Remove Loosen Barb fitting Operating Instructions Basic Elements of a Pressure WasherPressure Washer Operating Features Pressure AdjustmentsBasic Elements of Engine Pressure Washer TerminologyHOW to USE Spray Wand HOW to USE the Dual Tank Cleaning System Dual Tank Cleaning Solution TipsRead and Understand ALL Warnings Before Starting Unit StartingShutting Down Maintenance Engine Nozzle CleaningHOW to Clean the Water Inlet Filter Storage Engine PumpDual Tank Cleaning System Trouble Shooting Guide Problem Cause CorrectionPressure after ENG D27918 Warranty

DT2400CS specifications

The Delta DT2400CS is a high-performance tool that caters to the needs of both professionals and enthusiasts in woodworking and construction. This compact yet powerful saw is engineered for precision, durability, and ease of use, making it an essential addition to any workshop.

One of the standout features of the Delta DT2400CS is its robust 15-amp motor, which provides substantial cutting power and enables the saw to tackle a variety of materials effortlessly. The motor supports a high no-load speed, ensuring smooth and efficient operation. This allows users to cut through hardwoods, softwoods, and composite materials without encountering bogging down or stalling.

The DT2400CS is equipped with a 24-inch capacity, making it ideal for larger workpieces without sacrificing the portability that many users desire. Its adjustable table height and width provide added flexibility and support for various cutting tasks, allowing operators to achieve superior accuracy in their cuts. The saw features a precision-ground cast iron table for stability and reduced vibration, ensuring cleaner cuts and improving the overall experience.

Safety is a top priority with the Delta DT2400CS, which includes a range of protective features. The blade guard is easily adjustable and removable, ensuring that operators can maintain proper safety practices while having clear visibility of the cutting line. The integrated riving knife helps prevent kickback, and the on/off switch is conveniently located for quick access during operation.

The Delta DT2400CS also incorporates advanced technology for enhanced performance. The built-in dust collection port facilitates a cleaner workspace by connecting to standard shop vacuums, which is essential for maintaining visibility and safety. Additionally, the saw has a sturdy fence system that locks securely in place, allowing for straight, consistent cuts.

Overall, the Delta DT2400CS is characterized by its blend of power, precision, and safety features, making it an optimal choice for carpenters, cabinet makers, and DIY enthusiasts alike. With its professional-grade specifications and user-friendly design, this table saw is designed to handle a wide range of cutting tasks, elevating users' woodworking projects to the next level. Whether working on intricate designs or large construction projects, the Delta DT2400CS proves to be a reliable ally, ensuring both quality results and user satisfaction.
Top Page Image Contents