Risk of fluid injection. Do Not
attempt to change nozzles while pressure washer is running. Turn engine off before changing nozzles.
1.Press turret release button to
release turret.
2.Rotate turret to chosen nozzle.
3.Push turret onto nozzle and lock into place.
| 0º | 15º | 40º |
|
| Soap | |||
|
|
|
|
|
|
|
|
|
|
Spray Pattern |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Uses | powerful |
| intense |
| intense |
| applies | ||
| pinpoint for |
| cleaning of |
| cleaning of |
| cleaning | ||
| very intense |
| small areas |
| larger areas |
| solutions | ||
| cleaning |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Surfaces * | Metal or |
| metal, |
| metal, |
| metal, | ||
| concrete |
| concrete, or |
| concrete, or |
| concrete, | ||
| DO NOT use |
| wood |
| wood |
| wood, or vinyl | ||
| on wood |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
* 
The high pressure spray from your pressure washer is capable of causing damage to surfaces such as wood, glass, automobile paint, auto striping and trim, and delicate objects such as flowers and shrubs. Before spraying, check the item to be cleaned to assure yourself that it is strong enough to resist damage from the force of the spray.
HOW TO APPLY CHEMICALS AND CLEANING SOLVENTS
Applying chemicals or cleaning solvents is a low pressure operation. NOTE: Use only soaps and chemicals designed for pressure washer use. Do not use bleach.
To Apply chemicals:
1.Make sure the chemical hose
is pressed |
|
onto the |
|
barbed fitting |
|
located near | Barbed |
high pressure | Fitting |
hose |
|
connection of pump as shown.
2.Place other end of chemical hose with filter on it into container holding chemical/cleaning solution. NOTE: For every 7 gallons of water pumped 1 gallon of chemical/cleaning solution will be used.
3.Select the soap nozzle on the gatling spray wand, see o Use Spray Wand paragraph in this section.
4.After use of chemicals, place chemical hose into container of clean water and draw clean water through chemical injection system to rinse system thoroughly. If chemicals remain in the pump
it could be damaged. Pumps damaged due to chemicals will not be covered under warranty.
A14687 | 12- ENG |