Adjust brightness
Note
•• You can adjust display brightness only when the AC power cord is plugged in.
Press 
repeatedly to select different levels of display brightness.
5Product information
Note
•• Product information is subject to change without prior notice.
Set time
Note
•• You can set time only when the speaker is in standby mode.
1 Slide 
the left.
2 Hold
on the speaker for more than two seconds.
»»[12] begins to blink.
3 Press 
to confirm.
»»The hour digits begin to blink.
4 | Press |
|
|
| / |
| to set hour. |
5 | Repeat steps | ||||||
There is a spot on the lower right corner of the screen.
•The spot lights off when the time set before 12:00 at noon.
•The spot lights on when the time set after 12:00 at noon.
Specifications
Amplifier
Rated Output Power | 2 x 2 W RMS |
Signal to Noise Ratio | >67 dB |
600 mV RMS 20 | |
| kohm |
Bluetooth
Bluetooth version V2.1+ EDR
Frequency band
Rang10m (free space)
General information
AC power (power | Model: |
adaptor) | |
| Input: |
| 50/60Hz, 0.3A; |
| Output: 5V 1A; |
Operation Power | 3W |
Consumption |
|
Standby Power | <1W |
Consumption |
|
Dimensions - Main Unit | 300 x 116 x |
(W x H x D) | 156mm |
Weight- Main Unit | 1.2 kg |
EN 11