Zenoah SRTZ2610 Operation, Starting Engine, Cutting head will start moving upon the engine starts

Page 10

SRTZ2610/SRTZ2610F/LRTZ2610

8. Operation

STARTING ENGINE

WARNING

The cutting head will start moving upon the engine starts.

1.Rest the unit on a flat, firm place. Keep the cutting head off the ground and clear of surrounding objects as it will start moving upon starting of the engine.

2.Push the primer several times until overflown fuel flows out in the clear tube.

3.Move the choke lever to the closed position. choke lever

close

open

4.Set the stop switch to the “RUN” position. While pull- ing the throttle lever(1,2), push the throttle set but- ton(3), and release the throttle(2), then the throttle le- ver is in to the “start position”.

(A) Run

(B) Stop

(C) stop switch

IMPORTANT

Avoid pulling the rope to its end or returning it by releas- ing the knob. Such actions can cause starter failures.

6.Move the choke lever downward to open the choke. And restart the engine.

7.Allow the engine to warm up for a several minutes before starting operation.

NOTE

1.When restarting the engine immediately after stop- ping it, leave the choke open.

2.Overchoking can make the engine hard to start due to excess fuel. When the engine failed to start after several attempts, open the choke and repeat pulling the rope, or remove the spark plug and dry it.

STOPPING ENGINE

1.Release the throttle lever and run the engine for a half minute.

2.Shift the stop switch to the “Stop” position.

IMPORTANT

Except for an emergency, avoid stopping the engine while pulling the throttle lever.

IMPORTANT

When it doesn’t stop at the stop switch, move the choke lever to the closed position.

ADJUSTING THROTTLE CABLE

The normal play is 1 or 2mm when measured at the car- buretor side end. Readjust with the cable adjuster as required.

5.While holding the unit firmly, pull out the starter rope quickly until engine fires.

1 to 2mm

Cable adjuster

GB-10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents SRTZ2610F GB-1Wear head, eye and ear protection E13*97/68SH2G3*2002/83*0404*00Contents Parts locationSymbols on the machine SpecificationSRTZ2610F Working Circumstance For safe operationWorking Condition Working PlanBefore Starting Engine Using the ProductStarting the Engine Handling Fuel MaintenanceIf Someone Comes TransportationAttaching the Trimming Mechanism Set upHOW to Wear Quick ReleaseFuel Starting Engine Adjusting Throttle CableOperation Cutting head will start moving upon the engine startsAdjusting the Maximum Speed Adjusting Idling SpeedWarm up the engine before adjusting the idling speed Adjusting the Angle Cutting BladesMaintenance Fuel Filter Replacement Plug is a NGK CMR7HAIR Filter Spark PlugDisposal Procedures to be Performed After EV- ERY 100 Hours of USEStorage Intake AIR Cooling VentCase 1. Starting failure Troubleshooting guideLimited warranty Check Probable Causes Action

LRTZ2610, SRTZ2610, SRTZ2610F specifications

Zenoah, a renowned name in the outdoor power equipment industry, has made significant strides with its line of professional-grade trimmers, particularly the SRTZ2610, LRTZ2610, and SRTZ2610F models. These devices are engineered for efficiency, power, and user comfort, making them ideal for both commercial and residential landscaping tasks.

The SRTZ2610 series features a robust 25.4cc, air-cooled, two-stroke engine, which delivers impressive torque and power for cutting through dense vegetation. Users appreciate the lightweight design, which minimizes fatigue during prolonged use. The SRTZ2610F model stands out due to its unique fuel-efficient technology combined with a high-performance engine, contributing to longer run times and reduced emissions. This makes it not only effective but also environmentally friendly.

One of the key innovations across these models is the Advanced Ignition System, which ensures reliable starting and smooth operation. This feature is vital for professional landscapers who require tools that can perform at a moment's notice. Additionally, these trimmers come equipped with an ergonomic handle and a cushioned grip that provides excellent control and comfort, reducing vibrations during operation.

The LRTZ2610 model is specifically designed for versatility, boasting a detachable shaft that allows users to customize their equipment with various attachment options. This feature expands its functionality, enabling users to switch from trimming to edging or even powering pruning saws without the need for multiple devices.

Another notable characteristic is the Easy-Load trimmer head system, designed for hassle-free line replacement. This system aids in saving time and maintaining productivity, two critical factors in professional landscaping.

Moreover, Zenoah trimmers prioritize durability. Each model is constructed with high-grade materials that withstand the rigors of frequent use. The ignition coil and fuel system have been designed to require minimal maintenance, leaving users with more time to focus on their projects.

Overall, the Zenoah SRTZ2610, LRTZ2610, and SRTZ2610F models combine advanced engineering with practicality. Whether for residential gardens or commercial landscapes, these trimmers represent a reliable choice for anyone seeking quality and performance in outdoor power equipment. With their powerful engines, ergonomic design, and innovative features, Zenoah trimmers are an excellent investment for both professional landscapers and homeowners alike.
Top Page Image Contents