Maintenance | Zenoah SRTZ2610F, LRTZ2610 specification

SRTZ2610/SRTZ2610F/LRTZ2610

9. Maintenance

MAINTENANCE CHART

				Every	Every	Every
	System/components	Procedure	Before	25	50	100	Note
	System/components	Procedure	use	hours	hours	hours	Note
			use	hours	hours	hours
				after	after	after
	fuel leaks, fuel spillage	wipe out	✔
	fuel tank, air filter, fuel filter	inspect/clean	✔	✔			replace, if necessary
	idle adjusting screw	see adjusting	✔				replace carburetor
ENGINE	idle adjusting screw	idling speed	✔				if necessary
ENGINE

	spark plug	clean and readjust			✔		GAP: .025 in (0.6 ~ 0.7 mm)
	spark plug	plug gap			✔		replace, if necessary
		plug gap					replace, if necessary
	cylinder fins, intake air cooling vent	clean		✔
	muffler, spark arrester, cylinder exhaust port	clean, remove piled up carbon				✔
	throttle lever, stop switch	check operation	✔
SHAFT	cutting parts	replace if	✔
	cutting parts	something’s wrong	✔


	transmission, cutter case	grease		✔
	screws/nuts/bolts	tighten/replace	✔			✔	not adjusting screws

•Before cleaning, inspecting, or repairing the unit, make sure that the engine has stopped and is cool.

•Use protective gloves whenever inspecting, removing, sharpening, and installing the blades.

BLADES

•When refilling the tank or resting, it is often a good idea to use the time to oil the cutting blades.

•If a gap exists between the upper and lower blades, follow the procedure below to adjust them so that they fit more closely together.

•Loosen lock nut (A) as shown in the diagram.

2.Tighten screw (B) fully, and then turn one-third to one- half of a rotation backward.

3.While holding onto the screw to keep it in position, tighten the lock nut.

4.Check to make sure that the flat washer (C) is loose enough so that it may be turned by pressing on it with a finger.

(1)Upper blade

(2)Lower blade

NOTE

•Screwing in the screw too tightly may make it impos- sible for the blades to move. Conversely, not screw- ing in the screw tightly enough may make the blades of the trimmer feel dull and cause leaves and branches to become caught in the blades of the trimmer.

QUICK TIP

•If the blades become so worn down that it is no longer possible to eliminate the gap between them, you should contact the authorized ZENOAH servicing dealer from which you purchased your ZENOAH trim- mer to have the blades resharpened or replaced.

TRANSMISSION

•The inside of the transmission should be lubricant us- ing ZENOAH-approved lubricant after every 25 hours of use.

•When adding lubricant, use a grease gun to insert lubricant into the three grease nipples located on the transmission.

TYPE OF LUBRICANT TO BE USED

Always be sure to use #2 lithium heat-resistant lubricant.

(1) Grease fitting

GB-12

LRTZ2610, SRTZ2610, SRTZ2610F specifications

Zenoah, a renowned name in the outdoor power equipment industry, has made significant strides with its line of professional-grade trimmers, particularly the SRTZ2610, LRTZ2610, and SRTZ2610F models. These devices are engineered for efficiency, power, and user comfort, making them ideal for both commercial and residential landscaping tasks.

The SRTZ2610 series features a robust 25.4cc, air-cooled, two-stroke engine, which delivers impressive torque and power for cutting through dense vegetation. Users appreciate the lightweight design, which minimizes fatigue during prolonged use. The SRTZ2610F model stands out due to its unique fuel-efficient technology combined with a high-performance engine, contributing to longer run times and reduced emissions. This makes it not only effective but also environmentally friendly.

One of the key innovations across these models is the Advanced Ignition System, which ensures reliable starting and smooth operation. This feature is vital for professional landscapers who require tools that can perform at a moment's notice. Additionally, these trimmers come equipped with an ergonomic handle and a cushioned grip that provides excellent control and comfort, reducing vibrations during operation.

The LRTZ2610 model is specifically designed for versatility, boasting a detachable shaft that allows users to customize their equipment with various attachment options. This feature expands its functionality, enabling users to switch from trimming to edging or even powering pruning saws without the need for multiple devices.

Another notable characteristic is the Easy-Load trimmer head system, designed for hassle-free line replacement. This system aids in saving time and maintaining productivity, two critical factors in professional landscaping.

Moreover, Zenoah trimmers prioritize durability. Each model is constructed with high-grade materials that withstand the rigors of frequent use. The ignition coil and fuel system have been designed to require minimal maintenance, leaving users with more time to focus on their projects.

Overall, the Zenoah SRTZ2610, LRTZ2610, and SRTZ2610F models combine advanced engineering with practicality. Whether for residential gardens or commercial landscapes, these trimmers represent a reliable choice for anyone seeking quality and performance in outdoor power equipment. With their powerful engines, ergonomic design, and innovative features, Zenoah trimmers are an excellent investment for both professional landscapers and homeowners alike.