Zenoah CHTZ2500 manual  21 

Page 21

8. Maintenance

MA1(1)

MA2

(1)

MA3

.025 in

0.655mm

WARNING

•Make sure that the engine has stopped and is cool before performing any service to the machine. Contact with moving cutting head or hot muffler may result in a personal injury.

■AIR FILTER

•The air filter, if clogged, will reduce the engine performance. Check and clean the filter element in warm, soapy water as required. Dry completely before installing. If the element is broken or shrunk, replace with a new one. (MA1)

(1) air filter

■FUEL FILTER

•When the engine runs short of fuel supply, check the fuel cap and the fuel filter for blockage. (MA2)

(1) fuel filter

■SPARK PLUG

•Starting failure and mis-firing are often caused by a fouled spark plug. Clean the spark plug and check that the plug gap is in the correct range. For a replacement plug, use the correct type specified by RedMax. (MA3)

•REPLACEMENT PLUG IS A NGK CMR7A.

IMPORTANT

•Note that using any spark plug other than those designated may result in the engine failing to operate properly or in the engine becoming overheated and damaged.

•To install the spark plug, first turn the plug until it is finger tight, then tighten it a quarter turn more with a socket wrench.

TIGHTENING TORQUE:

87~104 in-lbs (9.8~11.8 N.m.)

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents HTZ2500 CHTZ2500 Page Contents Safety FirstHTZ2500 CHTZ2500 Parts locationHTZ2500 SpecificationsCHTZ2500  5  6  Wear head, eye and ear protection 7  Symbols on the machineWorking Condition For safe operationWorking Circumstance  8  9  Working PlanBefore Starting the Engine Starting the Engine 10  11  Using the ProductMaintenance If Someone Comes 12  Handling Fuel Transportation 13  Fuel HOW to MIX Fuel 14  Recommended Mixing Ratio Gasoline 50OILFueling the Unit For Your Engine LIFE, Avoid 15  OP1 OperationOP4 Starting EngineOP6 Adjusting Idling SpeedStopping Engine OP3 Running in the EngineHOW to USE OP7 OP8 18  OP9 Hedge Trimming Techniques 19  Maintenance Maintenance Chart 20   21  MA4 Muffler Intake AIR Cooling Vent 22   23  Storage Troubleshooting guideCheck Probable Causes Action  24  25  Parts list 26  Cutting Unit HTZ2500 S/N 100101 and up 27   28  Cutting Unit CHTZ2500 S/N 100101 and up 29   30  Engine Unit S/N 100101 and upDescription Part Number Qty Key#  31 Manufacturer’s warranty coverage RedMax 2-YEAR Limited Warranty RedMax Garantie limitée à 2 ans Page Komatsu Zenoah America INC

CHTZ2500, HTZ2500 specifications

The Zenoah HTZ2500 and CHTZ2500 are cutting-edge tools in the world of outdoor power equipment, specifically designed to cater to both professional landscapers and dedicated homeowners. These models stand out in the market for their robust performance and numerous user-friendly features that enhance efficiency and ease of use.

One of the most notable features of the Zenoah HTZ2500 is its powerful 24.5 cc engine. This engine provides ample power for various cutting tasks, ranging from trimming hedges to shaping shrubs. The lightweight design of the unit ensures that it is easy to handle, reducing operator fatigue even during long periods of use.

The HTZ2500 is equipped with a dual-action blade that significantly reduces the time needed for cutting. This feature allows for clean, precise cuts while promoting healthier plant growth by minimizing leaf tearing. The blade’s design also contributes to reduced vibrations, enhancing user comfort during operation.

Another critical aspect of the Zenoah HTZ2500 is its ergonomic design. The unit features a comfortable handle that minimizes strain on the hands and wrists, allowing users to maintain control and precision while working. The adjustable cutting angle further enhances usability, making it easier to reach difficult areas and achieve optimal results.

The CHTZ2500 model complements the HTZ2500 with additional features that cater to even more demanding tasks. It includes advanced technology for better fuel efficiency and reduced emissions, making it an eco-friendly choice for users who are conscious about their environmental footprint. The electronic ignition system ensures reliable starting every time, further enhancing its convenience.

Both models are compatible with a range of attachments, allowing users to customize functionality according to their specific needs. This versatility makes the HTZ2500 and CHTZ2500 suitable for various applications, from commercial landscaping to residential gardening.

Maintenance is also easy with these models, as they are designed for quick access to filters and spark plugs, ensuring that users can keep the equipment in top working condition with minimal effort.

In summary, the Zenoah HTZ2500 and CHTZ2500 offer a combination of power, efficiency, and user-friendly features, making them exceptional choices for anyone in need of reliable hedge trimming solutions. With their advanced technologies and practical characteristics, these tools are poised to meet the diverse needs of outdoor enthusiasts and professionals alike.
Top Page Image Contents